Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 8/29/2005 4:52:09 PM EDT
[Last Edit: 9/2/2005 4:45:24 PM EDT by Wrecked94Z]
We have a 9mm/.45 thread with pics and Im in the process of building my DPMS upper 22lr rifle and would like to see some pictures of everyone elses... I will hopefully be adding mine in the next few days. Thanks

ETA 9/2/05: Heres a pic of what it turned out to be. Looks pretty nice for a $300 upper IMO, going to function test tomorrow. Also drilling a couple holes in the bottom of the freefloat tube for a short rail.

ETA: So I dont have to start another thread who has the DPMS 10rd mags the cheapest? I see midway has them for are around $24. Any other places?

Link Posted: 8/29/2005 6:29:31 PM EDT
Okay, here's mine. Upper is a DPMS. Lower is an M261 in an old bubba-ed 1:12 barrel. Both will put Winchester Dynapoints into 3/8" at 25 yards but at 50 the M261 is spreading out to 1 /4" while the DPMS is still holding under an inch.

I recently replaced the upper on the M261 gun with an old Air Force M16 upper because I wanted to shoot iron sights. Don't have a picture of it but it looks just like any old USAF M16, or like an M16A1 without a forward assist.
Link Posted: 8/31/2005 1:23:39 PM EDT
[Last Edit: 8/31/2005 3:42:54 PM EDT by Bub007]
Here's mine. This started out as a DPMS AP4 Training .22lr upper. I transplanted the DPMS barrel onto an LMT upper to match my Defender 2000 lower and then installed a Larue 7.0. Because of the .22lr barrel extension I was able to have ADCO cut the barrel down to 14.5" beyond the extension and still have the OAL be 16+". Now if only DPMS would get around to putting out the hi-cap mags for this.

Link Posted: 8/31/2005 2:38:18 PM EDT
Here you go.

Link Posted: 9/1/2005 4:14:17 AM EDT

Originally Posted By emore:
Here you go.

so you're saying this is a dedicated .22lr?
Link Posted: 9/1/2005 2:03:08 PM EDT
Yes sir. It's a Rick Keuhl special. I think it was one of the last hand full of barrels he had.
I added a few items I got off the EE board.
Link Posted: 9/1/2005 2:28:56 PM EDT

Originally Posted By emore:
Yes sir. It's a Rick Keuhl special. I think it was one of the last hand full of barrels he had.
I added a few items I got off the EE board.

the spr looking setup

if so that is one sweet/expensive looking .22
Link Posted: 9/1/2005 4:57:08 PM EDT
Here is my .22 AR-15. Just put it togather last week, shooting 1/2" groups at 50 yds off the bench with wally mart cheap ammo

Stag lower
DPMS lpk
JP lower power trigger springs
EE board A2 stock and Grip
CZ 22 upper
cheapy Simmons scope
Link Posted: 9/3/2005 6:19:45 AM EDT
Here's half a rifle...

Bushmaster Upper
YHM FF Handguard
Wilson .22 Barrel
YHM Flash Hider

Currently up for sale in the EE.
Top Top