Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 8/30/2010 9:59:46 PM EST
was interested in trying a single point sling so i drank the magpul kool aid. i was wondering if it required me to get an ASAP or similar endplate or if the standard mil spec one would work ok. i also have a CTR stock, is there a sling swivel i could attatch to that instead of getting a new end plate or is that only for 2 point?

Link Posted: 8/30/2010 11:11:00 PM EST
you can try running it from the qd swivel on the ctr, but unless its a shorty, your muzzle will spend some time in the dirt. there are quite a few endplates that will work, here's just a few

http://ikickhippies.com/slap/

http://www.danieldefense.com/?page=shop/browse&category=slingmounts_carbineslingmounts

http://noveskerifleworks.com/cgi-bin/imcart/display.cgi?item_id=rec-qdep&cat=61&page=1&search=&since=&status=
Link Posted: 8/31/2010 7:46:31 AM EST
I replaced my ASP with the I Kick Hippies SLAP. I love the SLAP, works great and no annoying rattle when I do not have the sling mounted.
Link Posted: 8/31/2010 8:05:07 AM EST
I recently picked up the QD plate from Noveske. So far I really like it.
Link Posted: 8/31/2010 9:38:18 AM EST
I run the SLAP and I like it much better than the magpul ASAP + the SLAP doesn't have that annoying rattle noise that is going to give out your position when CQB-ing...
the CTR doesn't close all the way with it, but that doesn't bother me since I'm a big dude and I've never had the necessity to retract it.

I KICK HIPPIES - SLAP
Link Posted: 8/31/2010 4:11:01 PM EST
so no hope with the standard mil spec one? i don't have a castle nut wrench to take off the stock so it's a pain in the ass.
Link Posted: 8/31/2010 5:12:17 PM EST
Can try something like this it just bolts around the bolt. I have the -14 and it works well. The -13 should work but will not be nearly as ambidextrous as the ASP or the SLAP.
Link Posted: 9/1/2010 4:06:16 AM EST
+1 for the SLAP.

It's the ONLY way to go.
Link Posted: 9/2/2010 10:01:19 PM EST

Originally Posted By vanrichten:
Can try something like this it just bolts around the bolt. I have the -14 and it works well. The -13 should work but will not be nearly as ambidextrous as the ASP or the SLAP.
I use the 13. Not a problem in transition to offside/weak side. Easy to install, only need an Allen wrench.

Link Posted: 9/3/2010 7:52:56 PM EST
+1 for the Noveske
Link Posted: 9/4/2010 2:12:58 PM EST
i got the ms2 and asap a few weeks ago and love it.
Link Posted: 9/5/2010 2:16:00 PM EST
When I bought my Sully Stock they sent me this one. I run an MS2 sling and never have a problem. I don't really get the ASAP or other types like it. If your sling is adjusted property you should be able to transition from strong side to reactionary slide

GG&G
Top Top