Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 10/3/2004 2:55:35 PM EST
There is open space between the ARMS mount and the scope rings. Is it normal for this space to be here, or should top/bottom of 22M68 be totally flush/flat?

Thanks,

Brad
Link Posted: 10/3/2004 3:04:35 PM EST
Link Posted: 10/3/2004 3:11:09 PM EST
It's making contact, but the upper ring and lower ring do not touch in the middle where the 2 allen head screws are on each side.
Link Posted: 10/3/2004 3:12:54 PM EST
Link Posted: 10/3/2004 3:13:00 PM EST

Originally Posted By Chedderboy:
It's making contact, but the upper ring and lower ring do not touch in the middle where the 2 allen head screws are on each side.


That's fine, make it so that there is an equal amount of space on both sides. Did you use loctite?
Link Posted: 10/4/2004 3:30:46 PM EST
+1 to what AZ-K9 said.

Link Posted: 10/4/2004 3:59:09 PM EST
Normal. Just remember to screw down the bolts in a criss-cross pattern.
Top Top