Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/23/2003 11:16:33 AM EST
Just got an ACE Skeleton stock from CMMG (thanks for the good service) and am having a little trouble with what should be an easy task. I can't get that top screw out of the A2 stock for the life of me. All I have is hand tools, and my screw driver keeps walking out of the groove on me. are there any tricks to this, or is it brute force? I thought I'd stop and ask before I destroy something. Thanks, I'll post when I get it installed.

Link Posted: 9/23/2003 11:36:08 AM EST
I know what you mean. I f'd up my Bushy's screw doing this. The trick is to have a screwdriver that's head is as wide as the groove itself. It does require some force but you should be able to handle it.
Link Posted: 9/23/2003 11:39:36 AM EST
Yeah, get a big screwdriver. Mine came off fine, luckily.
Link Posted: 9/23/2003 3:51:38 PM EST
This might sound a little off the wall but it works. 1st) Use a large (hollow ground is best) screwdriver that just fits. Place the muzzle on the floor on something soft. While standing, grab the rifle between your legs, (told you this sounds weird!) and use one hand to push down on the screwdriver and the other to turn. Clamp a vise grips (or use a square shafted screwdriver w/ a wrench) on the screwdriver if you need extra torque. 2nd) Buy extra buttstock screws to replace the one you mangled with the first attempt. Scot
Link Posted: 9/23/2003 5:57:48 PM EST
thanks for the replies, I'm headed to the hardware store tomarrow to get a fater screw driver. I'm going to order a spare screw too just incase I want to use the old stock later.
Link Posted: 9/23/2003 6:57:48 PM EST
the screw has locktite on it. that's why it won;t budge. i poured some rubbing alcohol in and it loosened up the locktite on mine.
Top Top