Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/24/2006 1:56:30 PM EST
... I know how to get my pistol grip and to watch out for the spring etc etc. NOw the MIAD grip seems fairly easy but how do i get the core out? i dont want to snap anything off by forcing it. On the base i am seeing a forward snap open locking indent and on both sides a spot to seemingly grip it and lastly at the back of the grip i see another indent? Where am i supposed you pull or does it pop open?
Link Posted: 2/24/2006 2:00:08 PM EST
When mine was new, it was very difficult to get the core out...
The best grip is grab the sides with my thumb and middle finger.
then depress the locking tab with my index finger and pull.

It/they should loosen up a bit in time...
Link Posted: 2/24/2006 2:35:11 PM EST
how do i get the read hinge of the trigger guard off? i know how to fold it down but how does one get it to come completely off?
Link Posted: 2/24/2006 2:41:08 PM EST
You need a punch the same size as the roll pin in the rear. Lay the receiver on something hard and flat, like a two by four with a space under the roll pin to let it drop thru when you carefully drive it out with the punch and hammer.
Top Top