Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 4/2/2006 10:24:28 AM EDT
Thinking about doing alittle up grade to my factory Bushmaster trigger. Thinking about just putting in the 4.5 lb trigger springs and adding the speed hammer from JP Enterprises. Think this will be a good improvement over the factory set up. Any suggestions. Anyone have expierence with these products. Thanks in advance for your information.
Link Posted: 4/2/2006 11:45:58 AM EDT
You might find this useful. www.ar15.com/forums/topic.html?b=3&f=12&t=268257

I'd save the money on the JP speed hammer unless you're going to go all the way and get the trigger as well.
Link Posted: 4/2/2006 9:06:26 PM EDT
Do not add the JP hammer unless you also use the JP trigger. The hammer has no limitation on sear engagement and with the stock trigger it will have a longer pull that the stock pieces.
Link Posted: 4/2/2006 9:44:07 PM EDT
Thanks for the responses I think I might just break the bank and get a Geissele. I use it my rifle for patrol and their LE trigger looks like a good one to get. Thanks again.
Top Top