Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
User Panel

Site Notices
Arrow Left Previous Page
Page / 8
Posted: 7/26/2011 1:55:09 PM EDT
I started a thread about this earlier today on several different forums, Got some good feedback so I broke out the ol hack saw and got to work.

I started with a junk upper, I believe it was a colt car15 that was cut down and then somebody pinned a cheap slip on flash hidder to the end, it wiggled and the fit was sloppy so.....why not.














While were on all things mini....



Link Posted: 7/26/2011 9:42:23 PM EDT
Quoted:
I dont understand why you didn't just send the barrel to ADCO in the first place and have it cut down to 10.3" and threaded, It would have only cost you $65 assuming you have the tools to pull the barrel yourself. And they would have drilled the gas port to the correct size free of charge





+1
Link Posted: 7/26/2011 9:53:56 PM EDT
I think it is interesting, and screw the people complaining about the stamp, or sending it off. You had a beater upper and decided to try something, I don't get wtf everyone's problem is.  

To the OP I think  it is interesting, slow work with the gas port, but if you drill it eventually it will cycle.  You can always drill more, but much harder if you drill too much. In the end if you totally dick it up and can't make it work, send it to ADCO and they will get it going for you.

Link Posted: 7/26/2011 9:54:26 PM EDT
Quoted:
I'm not going to lie. That is gotta be one of the top 15 dumbest things I've seen someone do to a weapon..


At least hes out of the top 10

Link Posted: 7/26/2011 10:05:45 PM EDT
Quoted:
Quoted:
I'm not going to lie. That is gotta be one of the top 15 dumbest things I've seen someone do to a weapon..


At least hes out of the top 10



Better than my AK that ended up on a firearms blog.

http://www.thefirearmblog.com/blog/2011/03/08/building-a-battlefield-pickup/

BTW, this is what it looks like today....
Link Posted: 7/26/2011 10:08:26 PM EDT
I can't wait to see some photos or video of you shooting this thing

Quoted:
OP dont explain anything to anybody about the tax stamp..all the bitches complaining about you not having a tax stamp..im glad they are not your neighbors you would already probably have the police at your door to see if you did have a tax stamp.....buisy body gun owners are the worst gun owners and people..they worry about everything but minding their own buisness.Nice weapons love the Browning .50.As far as the PUG thats one way to get the barrel down to 10 inches or to get the FSB off without having to unpin the flash hider


Yup. It's really shocking how many people on here are busybody do-gooders
Link Posted: 7/26/2011 10:13:35 PM EDT
Ya know, I dont think I posted this little project on here because I did not want to hear anybodies mouth but here goes.....

GLOCK CHOP.....

It looks 100% better today, I got rid of the mag extension and took all the paint off of it.

Note the messed up plastic around the pin holes.....it was because of this...
http://www.youtube.com/watch?v=JoPZZrEeaMc

















Link Posted: 7/26/2011 10:40:03 PM EDT
your avatar should just be wile e. coyote.


in fact, the mods should change your screenname.
Link Posted: 7/26/2011 10:42:21 PM EDT
I detect a theme with your paint jobs...

BTW, Nice Glock mod.  When are you going to stipple it?
Link Posted: 7/26/2011 11:23:10 PM EDT
I really dont think I am right away.

I've steepled enough of them and it gets boreing after a while, very time consuming. The 23 feels great (my buddy did that particular gun) but its a gen 3, I dont think I will like the profile of a gen 2 being steepled.
Link Posted: 7/27/2011 12:37:34 AM EDT
I don't know if you're stupid, crazy, or a mad genius.  

Kudos to you for having the guts to cut up guns like that.
Link Posted: 7/27/2011 2:07:32 AM EDT
.....So this is what happens when you take:  tools  +  guns  +  alcohol.


Link Posted: 7/27/2011 4:51:57 AM EDT
Cool PUG.  I dig your style & creativity on your masterpieces.
Link Posted: 7/27/2011 5:23:47 AM EDT
Quoted:
Quoted:
I kinda thought the pic with the machine gun in the background ended the tax stamp deal...
good show tailo

Since we know your redneck ass can hillbilly up a colt and work a keyboard lets do something different.
Make a video let's see if that dog can run


Most redneck pic of the century........
http://img219.imageshack.us/img219/376/200903170015.jpg


i used a 1919 on an AA tripod as a christmas tree one year.  complete with candy canes in the barrel shroud holes.  

my son was pissed when we got a real tree the next year...

Link Posted: 7/27/2011 5:25:19 AM EDT
i predict that hacksaw to become ARFamous
Link Posted: 7/27/2011 5:28:41 AM EDT
Screw the busy bodies.

I still want to see a video of you shooting that thing. And making it work shouldn't be a problem. Heck you already have the hand drill
Link Posted: 7/27/2011 5:31:20 AM EDT
Good job OP.
Link Posted: 7/27/2011 5:36:07 AM EDT

Link Posted: 7/27/2011 6:45:21 AM EDT
I caught a lot of flak for this on another forum:

Personal taste is, well... Personal.
Link Posted: 7/27/2011 7:17:26 AM EDT
Quoted:
Quoted:
Quoted:
I kinda thought the pic with the machine gun in the background ended the tax stamp deal...
good show tailo

Since we know your redneck ass can hillbilly up a colt and work a keyboard lets do something different.
Make a video let's see if that dog can run


Most redneck pic of the century........
http://img219.imageshack.us/img219/376/200903170015.jpg


i used a 1919 on an AA tripod as a christmas tree one year.  complete with candy canes in the barrel shroud holes.  

my son was pissed when we got a real tree the next year...



lol OMG did you post a picture of that online? Ive seen it before....
Link Posted: 7/27/2011 7:18:52 AM EDT
Quoted:
I caught a lot of flak for this on another forum:
http://i90.photobucket.com/albums/k252/chrisq_01/DSCF0396.jpg
Personal taste is, well... Personal.


Done a couple of those in the past to, left the cocking serrations black (lazyness and it looked cool)
Link Posted: 7/27/2011 8:46:25 AM EDT
2011: The Pug.
An epic adventure of light and sound


"Its fulls of stars. Literally, just read the casting list" - Siskel and Ebert.

"i laughed till I cried" -some random american joe

"Art like this is worth losing functional hearing in my left ear, dont forget who I married"  - Bill Clinton

Link Posted: 7/27/2011 8:58:06 AM EDT
Tailo, kudos to you.

Its your firearms, its your business.

BUT putting up your AR-chop here in ARF is like going to a Prius meet with a Humvee and expect to be welcomed.
Link Posted: 7/27/2011 9:04:31 AM EDT
Quoted:
Tailo, kudos to you.

Its your firearms, its your business.

BUT putting up your AR-chop here in ARF is like going to a Prius meet with a Humvee and expect to be welcomed.

+1 to everything said here. It's your stuff, do as you please with it. It's not as if you chopped something extremely rare.

ETA: But all that said, I can't help but wonder about the crown on that thing.
Link Posted: 7/27/2011 9:24:54 AM EDT
Here we are on page 5 and I can't believe that no one has mentioned "Son's of Gun's"

This could be a industry game changer for season two!

Tune into Discovery Channel this fall to see the full story on the PUG!
Link Posted: 7/27/2011 10:24:32 AM EDT
Makes you think it would be something someone would do to a 20" upper during the AWB.
Link Posted: 7/27/2011 12:18:29 PM EDT
Meh. As long as it makes you happy, have at it. I'm sure it throws a fire ball like no other. Get some videos of that thing.
Link Posted: 7/27/2011 12:49:10 PM EDT
Hey, I broke the barrel on my toy M-16 right where you cut yours.  Still had fun with it, even after I gave up trying to glue the barrel back on.  Looking at your Pug brought back some fond memories, thanks!
Link Posted: 7/27/2011 1:33:38 PM EDT
SERIOUSLY I want to see a night video and the 6 foot long flame
Link Posted: 7/27/2011 4:03:07 PM EDT
Quoted:
I caught a lot of flak for this on another forum:
http://i90.photobucket.com/albums/k252/chrisq_01/DSCF0396.jpg
Personal taste is, well... Personal.


Get rid of that nickel plated sissy pistol and get yourself a...  oh, wait, that is a Glock

eta:  "That is the shiniest grenade I've ever seen"

Link Posted: 7/27/2011 4:17:15 PM EDT
just a few questions .
what type of hacksaw frame is that?
what type of blade did you use and what was the teeth per inch count ?
and finally  is your gunsmith shop named guns and anvil repair ?
I cant really say a lot since I got frustrated and removed a rock river free float tube with a 24 inch pipe wrench .

have fun and post vids when you have them.
Link Posted: 7/27/2011 6:31:27 PM EDT
Got to the range today to find that my SD card was missing from my camera.....

BUT


I had enough internal memory for ONE video..... Took another on my cell phone but I'll have to get on my laptop to put it on.


The PUG lives and breathes fire. I was limited on time but I put 4 mags down it with out a hitch. As for accuracy, its not as good as my 11.5 but its good enough to hit a chest size target at 100 yards. I suspect with a proper crown job that it will do alittle better.

To all the nay sayers that said it would not work
http://www.youtube.com/watch?v=GeXgwbx79IQ
Link Posted: 7/27/2011 6:33:12 PM EDT
this is great
 



i feel like i needed hearing protection just watching that video.




haters gonna hate.



Link Posted: 7/27/2011 6:47:31 PM EDT
You can barely see a decent sized flame coming out of that thing.
Link Posted: 7/27/2011 6:52:46 PM EDT
It was 12

Actually the main reasion you dont see any flame is because the camera was set on its lowest setting so I could get as much time as I could. You could see a pretty good fireball almost every round if you were there.

I'll be more prepaired next time and I'll have some decent pictures.

Link Posted: 7/27/2011 7:17:49 PM EDT
Bad Ass IMO. I hope I never get in a shootout in a bathroom stall, but you got it covered!
Link Posted: 7/27/2011 7:29:04 PM EDT
na, this is my bathroom stall gun

Link Posted: 7/27/2011 7:38:58 PM EDT
Quoted:
Got to the range today to find that my SD card was missing from my camera.....

BUT


I had enough internal memory for ONE video..... Took another on my cell phone but I'll have to get on my laptop to put it on.


The PUG lives and breathes fire. I was limited on time but I put 4 mags down it with out a hitch. As for accuracy, its not as good as my 11.5 but its good enough to hit a chest size target at 100 yards. I suspect with a proper crown job that it will do alittle better.

To all the nay sayers that said it would not work
http://www.youtube.com/watch?v=GeXgwbx79IQ



Link Posted: 7/27/2011 7:46:34 PM EDT
You sir, are a mad scientist with a hack saw.  

I respect that.  

Well done on sticking to your guns on this project.  (pun intended)

BTW, I do NOT want  you as my number two man in the stack.  Nomex be damned, I'd be fried golden brown by the muzzle flash from that thing if you shot past me!  
Link Posted: 7/27/2011 7:49:26 PM EDT
Quoted:
Quoted:
I'll try to shoot it first, if not ill send the whole upper to ar15barrels.com and have them work out the issues with the gas sysem. If it has to be converted to a pistol gas system I'm ok with spending the $$$..



Why not just shoot it into space? You would likely get it back sooner than Randall will return it.


this is true...
Link Posted: 7/27/2011 7:53:28 PM EDT
I would have cut it right behind the brake and then have it threaded..
Link Posted: 7/27/2011 8:10:35 PM EDT



Quoted:


na, this is my bathroom stall gun



http://img716.imageshack.us/img716/2831/052nn.jpg


That's hot stuff homie. Lovin' it.

 
Link Posted: 7/27/2011 8:14:25 PM EDT
Glad to see it worked, I love it when all the haters have to eat crow
Link Posted: 7/27/2011 8:19:28 PM EDT
Quoted:
I caught a lot of flak for this on another forum:
http://i90.photobucket.com/albums/k252/chrisq_01/DSCF0396.jpg
Personal taste is, well... Personal.


Where on earth did you get your glock slide chrome plated/dipped whatever.

Im trying to add things to the birthday list for the wife
Link Posted: 7/27/2011 9:12:02 PM EDT
Not sure how he did his but most people just sand off the finish and buff it.
Link Posted: 7/27/2011 9:24:14 PM EDT
Quoted:
It's hilarious that so many people are worked up that the OP decided to have fun with a junk upper. Of course, since so many people here seem to think the primary purpose of a rifle is to look cool in pictures on the internet I should not be surprised at this reaction.  


+1

took the words
Link Posted: 7/27/2011 10:19:16 PM EDT
Quoted:
Glad to see it worked, I love it when all the haters have to eat crow


+1

Link Posted: 7/27/2011 10:37:20 PM EDT
It's funny, wheres everyone that was bitching about the dwell time....
Link Posted: 7/27/2011 10:52:34 PM EDT
I like your taste sir, glad to see it ran good.



Do you have any other entertaining franken projects to share?




Link Posted: 7/27/2011 10:55:57 PM EDT
Looks like it runs.
Take it hunting, kill and cook with one shot.
Link Posted: 7/27/2011 11:06:22 PM EDT
Nice to see that it runs good. Didn't you post that "glock chop" project on the G&G forums? You are very creative with a hacksaw, and I applaud it.
Arrow Left Previous Page
Page / 8
An error occurred on the server when processing the URL. Please contact the system administrator.

If you are the system administrator please click here to find out more about this error.