btw ... hello and it's great to be back ! I see the boards are alive and healthy.
I've asked this before, however, in light of new/improved advancements in products ... what would YOU purchase if building a new AR style rifle, if money was no object ?
For example :
What you think is important as I need feedback for a new build ... so don't be shy.
Thanks in advance, and shoot well and often
uh.........what do you plan on doing with the rifle?
Full Auto Sear
Hello eklikwhoa ... just throw the ideas out there, and I'll look at 'em.
However, for added info., I'm going to eventually build 3 or 4 ARs , like 1 Carbine, 1 Varmint, 1 General 20 " ... but like your sig says, FUNction over form
I love it, and I'll consider it on another project
Great idea !
Carbon barrel and an ACOG.
Colt M16 Registered Lower Receiver
Colt M4 Upper Receiver
Colt 14.5" SOCOM M4A1 Barrel
LMT SOPMOD Stock
LaRue 7.0 FF Rail
SRT Hurricane Sound Suppressor
MGI Rate/Recoil Reducing Buffer
MGI Adjustable Gas Tube
Tango Down Vertical Grip
Tango Down Battle Grip
Aimpoint ML2 Optic
ARMS #22M68 Mount w/ Cantilever Spacer
ARMS #40 BUIS
Colt Side Sling Adapter
Magpul Ladder Rail Protectors
KNS Anti-Rotation Sear, Hammer, and Trigger Pins
Wolff HD Extractor Spring
Luv it !
Keep it coming !
So do I.
Very Nice !!
Damn I'm jelous! While you're at it, why not sling something in 37mm or 12 gauge under the barrel?
Might as well go with the DD and get the 40 mm.
But yeah...Full auto, SBR and suppressed would be the way to go. Probably a Noveske SBR....
Does "money didn't matter" mean "money is available" or "money is nowhere to be found"? I also told my girlfriends that money didn't matter because I had none.
But if money is available and didn't matter how it's spent, I would forget the AR and just buy a few miniguns...
I would only need a AR-15 sticker to slap on the Brand New imported HK-93 that I could throw tons of money at getting one import into the states.
Have you ever run a shorty barrel on that rig? Say a 10.5" or 11"? Just curious.
Take another look at M4Madness list, these four items will cover any barrel length that he was to run without problems.
SRT Hurricane Sound Suppressor (read back pressure even on a 10.5" barrel)
MGI Rate/Recoil Reducing Buffer (read not only deals with cycle rate reduction, but allow to slow the shorter barrel spike in regards to mass)
MGI Adjustable Gas Tube (read ablility to tune the gas system with the added back pressure of the can)
Wolff HD Extractor Spring with D-Fender "O"-Ring (prevents the case from being left in the chamber if the gas system is tuned up too high and the rifle is on the verge of overcycling).
if money didnt matter and somewhat endless then i would build anything i could think of and every configuration i could find
.50 beowulf upper, a registered DIAS, and some Ben Gay for my shoulder.
You forgot the PVS & PEQ. ;)
Would defeintly get a .458 SOCOM before a .50 Beowulf IMO.
Here's my list:
Barrel: Colt M4 SOCOM, ABS SS/ Carbon Fiber, Lilja & Noveske
Upper: Colt M4, KAC, LMT MRP & HK416
Lower: Colt rare A2 with small pivot and FCG pins, KAC & LMT
Knight's Armament Co. URX2 & Larue Tactical FF rails
Tango Down, KAC and Magpul rail panels
Magpul ladder rail protectors
Tango Down & KAC VFG
KAC rail sling mount
BUIS: GG&G, KAC, Larue, LMT, Matech & PRI
PRI Gas Buster CH
Colt M16, Young Mfg & JP BCG
D-Fender & Crane O-ring
KAC, Jewell & JP match trigger
Norgon ambi magazine catch
JP adjustable/ reversible selector
Enidine hydraulic recoil buffer for rifle/ SPR length
MGI rate reducing buffer for carbine length
Magpul MIAD grip & Tango Down Battlegrip
Genuine original Crane, NOT LMT, SOPMOD stock (about $400), Vltor & Magpul M93B or future replacement model
GI high quality Teflon finished magazines
Magpul followers and plates
Wolff AR springs set
Optics: Schmidt & Bender, NightForce, Leupold, ACOG with J-Point, Aimpoint M3 & EOTech
Mounts: ARMS, KAC & Larue Tactical
There are other great stuff out there that I didn't mention.
Do it the ARFCOM way get everything.
If money wasnt a thing see above....plus the m203 heheheh
In fact, that's the only upper I own. I'm too broke to buy any more right now.
CMT Flat Top
Noveske AFGHAN. fluted
Troy BUIS set
Larue SPR mount
S&B Short Dot
Tango Down Grips
Specter Sling (single point)
I would have a straight up 20 inch A4 configuration built to these specs:
Solid gold upper and lower
Mink covered furniture
Chrome free float handguard
Zebra skin 3 point sling
Diamond encrusted ACOG
Gold plated Beta-Mag with spinners on the front of the drums
I'm gettin great ideas here, bring some more !
Thanks Always ~
CMT ramped upper.
CMT MP tested bolt.
CMT M16 bolt carrier.
CMT Charging handle and remaining parts.
PRI Gas Buster charging handle latch.
Noveske 14.5" Afghan Barrel with dimpling and heat dissipation coating.
Larue low profile gas block.
Larue 13.2 forend.
Pretty much anyone's gas tube dipped in thermal barrier coating.
Vortex flash suppressor.
Troy back up Irons.
Noveske lower. (Hey, I like the logo )
Chip McCormick tuned single stage trigger.
Magpul MIAD grip.
LMT SOPMOD stock.
And probably a few things I've temporarily forgotten.