Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/22/2017 10:05:29 PM
Posted: 9/18/2004 8:06:07 AM EST
I have a LMt upper and I am about to install a vortex Flash hider. The flash hider currently on my LMT should be simply threaded on and i need to turn it clounter clockwise, right? I have been trying to removie it but it is stuborn as hell. Am i supposed to twist the devil out of it?
Link Posted: 9/18/2004 8:16:19 AM EST
Twist like hell. Use a screwdriver through the slots if you have to.
Link Posted: 9/18/2004 8:20:59 AM EST
[Last Edit: 9/18/2004 8:21:26 AM EST by gotm4]
Put the barrel in vise blocks tightly and turn the FS counter clockwise. If you use a reciever block you'll cant the barrel within the reciever a little (don't ask how I know ) Then torque the new one using a new crush washer to 15-20ft lbs.
Link Posted: 9/18/2004 8:23:32 AM EST
gotm4, I have removed about a half dozen so far by holding onto the FSB really tight and twisting like hell with a screwdriver.
Link Posted: 9/18/2004 8:26:24 AM EST
I dont got a vise nor does the Vortex need a crush washer. I'll try the screw driver method....
Link Posted: 9/18/2004 9:58:34 AM EST

Originally Posted By Combat_Jack:
Twist like hell. Use a screwdriver through the slots if you have to.



It worked. It slowly creaked loose just enough to use a pair of pliers effectively to screw it off. thnx guys. I'm that much closer to finishing my AR.
Link Posted: 9/18/2004 12:58:41 PM EST
How is the fit & finnish on that LMT. I am waiting for my lower on its way to my FFL. Then I plan to order the LMT M4 16" upper
Link Posted: 9/20/2004 8:49:06 PM EST

Originally Posted By gsd2053:
How is the fit & finnish on that LMT. I am waiting for my lower on its way to my FFL. Then I plan to order the LMT M4 16" upper



My LMT fits nice and snug on my Bushy lower. Finish is great. My Bushmaster is a bit of a flatter finish but its ok to me. You can't go wrong with the LMt.
Link Posted: 9/20/2004 8:58:23 PM EST
My LMT had machine marks and no T markings, but it works great.
Top Top