Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 9/25/2004 5:18:36 PM EST
Just installed a Phantom FS with a crush washer. I hand tighten it and the closed port is approximately at 1 o'clock. I, then, indexed it to 6 o'clock with the 3rd open slot at 12 o'clock. Am I done? I noticed the threading had not completely bottomed out. There is still a gap between the front of the muzzle and the back of the FS . It took considerable amount of force to crush the washer to the current indexing point. Should I continue to crush it until the threading bottoms out? Then again, at that point, the slots may not be indexed correctly. Is it OK to have that gap? Thanks.
Link Posted: 9/25/2004 6:41:36 PM EST
I did one earlier today,sound like you got it right.
Few pictures. :D







TG
Link Posted: 9/25/2004 7:09:38 PM EST
If you want the closed port at 6:00, your done. People who shoot with night vision equipment put the closed port at 12:00.
Link Posted: 10/5/2004 5:43:37 AM EST
I think if you use the A1 flash hider, you can actually get more muzzle climb with rapid fire (some of the flash goes below the muzzle).
Top Top