Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 6/25/2003 6:50:58 AM EST
I am trying to decide on getting an SBR (14.5")or just getting a 14.5 with a Gemtech Bi-Lock permanently mounted to the barrel to get 16", thus bypassing the paperwork and NFA process.

Do you measure the barrel minus the flash suppressor, like is my current SP-1 16" barrel 16" + the flash hider?

Are the 14.5" barrels 14.5" + the flash hider?

I wanted something shorter than what I have if I am going to mount a suppressor.

Link Posted: 6/25/2003 8:08:52 AM EST
If you permanently attach the flash hider, the it is from the face of the bolt to the edge of the flash hider. therefore, the 14.5 inch barrel with a welded on Gemtech bi-lock will be enough to satisify the require for 16inch.
Link Posted: 6/25/2003 10:23:48 AM EST
Link Posted: 6/26/2003 4:47:31 AM EST
So in actuality, my 16" SP-1 Barrel is really 16" + the birdcage flash unit?
Link Posted: 6/26/2003 7:20:55 AM EST
Yes, a 16" bbl is 16" long. Any muzzle device will make it longer. This is why folks have permanent muzzle devices on 14.5" M4 barrels, to get them out to 16" as required by the NFA. One tiny correction to measuring length, the length is measured to the face of a [b]cocked bolt[/b], no firing pin sticking out the front. Don't expect any barrel to measure .001" to its nomimal length either. -- Chuck
Top Top