Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 5/2/2003 10:55:37 AM EST
I don't have a multitool - yet and have never had reason to remove the stock. Until now.

How do I remove it without a tool?
Link Posted: 5/2/2003 10:58:03 AM EST
I take it this is a telestock?
Link Posted: 5/2/2003 11:00:43 AM EST
Nope.. sorry. Just a standard A2 stock. Does it come out by the screws in the buttplate or the ring at the receiver?
Link Posted: 5/2/2003 11:16:14 AM EST
Just the upper screw in the buttstock. I recommend downloading the -23 and read Chapter 3 - full instructions with pictures. [url]http://www.mcdl.org/Manuals/Manuals/Maintenance/TM9-1005-319-23.pdf[/url]
Link Posted: 5/2/2003 11:29:55 AM EST
What Forest said. Just remove the upper screw. The lower screw holds in the trapdoor and sling attachment. Are you also needing to remove the buffer and buffer tube (also called the receiver extension)? Why are you removing the stock? Putting on a new one?
Link Posted: 5/2/2003 11:41:57 AM EST
No & yes. Removing the A2 stock, installing an A1 stock - I don't really need to remove the buffer/spring assembly.
Link Posted: 5/2/2003 12:59:09 PM EST
just the upper screw, but the stock holds pressure on the rear take-down pin detent spring. So when you slide off the stock, be watching for the spring. Also the A1 stock uses a shorter top screw, and doe not use the receiver extension spacer.
Link Posted: 5/3/2003 4:14:57 AM EST
The shorter screw is critical. If you shorten your old screw inspect inside the lower receive extension to ensure the screw doesn't stick thru the hole, it'll damage the buffer and can cause stoppages. -- Chuck
Link Posted: 5/5/2003 5:48:14 AM EST
Yikes! Glad I asked before I went and shot it. I went home Friday and swapped them out. The A1 went on with the A2 screw just fine - but I have not shot it. I guess I will take it back apart. Where can I get a shorter screw without altering the longer one? I want to keep that to be able to use the longer stock.
Link Posted: 5/5/2003 6:27:43 AM EST
Jeff or John at [url]www.cmmginc.com[/url]
Link Posted: 5/5/2003 7:17:01 AM EST
Fulton Armory also carries them [url]http://www.fulton-armory.com[/url]
Top Top