Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 10/20/2003 3:14:35 PM EDT
[Last Edit: 10/21/2003 7:56:05 PM EDT by Lockedon]
I want to take off the Bushmaster Fixed Collapsable stock. Anyone have any advice how to go about doing this?

Also has anyone else ever tried to take it off using a strap-wrench?

Thanks


Edited to add: Thanks everyone! The Stock is off and safely replaced with an ARFX-E stock from Del-Ton.
Link Posted: 10/20/2003 4:32:31 PM EDT
[Last Edit: 10/20/2003 4:36:23 PM EDT by VICAP]
They come off the same way. Just back the nut off and rotate the entire stock counter-clockwise. Get a barrel wrench with a peg on the other end for removing these, or just position a punch in one of the nut-grooves and gently tap it with a hammer. Only thing to watch is when you unscrew the buffer tube past the retainer and it's spring. Hold your hand over it or you'll loose it. Edited: Oh yeah, the strap-wrench won't work because you need to loosen the nut first. After loosening the nut the stock will turn easily by hand.
Link Posted: 10/20/2003 4:50:30 PM EDT
[url]http://www.bushmaster.com/shopping/gunsmith/223-telewrench2.asp[/url] Spend the six bucks for the wrench, and save yourself the headache.
Link Posted: 10/20/2003 4:57:59 PM EDT
Here's the one I use: [url]http://www.triplebreakproducts.com/Olympic/h28.htm[/url]
Link Posted: 10/20/2003 5:05:39 PM EDT
I used a strap wrench to take off and put on a telestyled stock. I loaned out my telestock tool, and never got it back, so I went out to Sears and bought a strap wrench. It's definitely easier with the telestock tool, but it is possible with a strap wrench.
Link Posted: 10/20/2003 5:19:11 PM EDT
I ordered my Ace LE stock and combination wrench at the same time, but the stock came first. Instead of using a strap wrench (I don't own one) I wrapped the nut with electrical tape and used a pair of vice grips to loosen it. The tape protected the finish and it worked fine. Naturally the next day my wrench showed up [>:/] Based on the recommendation of a few folks in the maintenance forum I bought a DPMS combination wrench like this one: [img]http://www.dpmsinc.com/products/TL-MW.jpg[/img]
Top Top