Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
4/22/2019 5:32:20 PM
Posted: 10/29/2004 7:12:33 PM EDT
Howdy guys. My grip is getting loose and starting to rock forward and backward on the lower. I looked at the build it yourself guide, and the grip install is not in there, and there was a TM link here, but I am probably dense and do not see it. It looks like a single allen key in there with a star washer. What size is it, and anything I should look out for?

Sorry, just a little hesitant to break/shear off anything on my baby.

Thanks for your help.

-Redfoot
Link Posted: 10/29/2004 8:07:51 PM EDT
I cant remember what size the allen head is.I tossed the allen head screw and replaced it with a slotted head screw long ago.
If the grip is loose just snug it up a bit.Do not ham fist the screw driver.Just snug it up until the grip stops moving around.
hth
Link Posted: 10/30/2004 5:05:18 AM EDT

The grip screw uses a 3/16" allen... I use a long T-handled allen to make it easy to reach inside the Hogue and tighten the screw...

Link Posted: 10/31/2004 8:30:21 AM EDT
Loc-tite is your friend, the purple or blue stuff. A long T-handle is a must too. I recently ordered a Cav Arms/Falcon Ergo grip and they don't include a %@#!*&^ hex with the grip! Tango down Battlegrip does.
Link Posted: 10/31/2004 4:43:13 PM EDT
Thanks guys, that was exactly the info I needed.

Happy hunting!

-Redfoot
Top Top