Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/28/2005 3:33:23 PM EST
[Last Edit: 12/28/2005 3:34:32 PM EST by Ghostface]
I'm thinking about my next build to start in the spring. This will be sort of a hobby build, no real need to have it yesterday. I've been thinking about going for a 20 inch match type build, mainly for varmit hunting and plinking. My question begins with what upper to start with, I've been thinking real hard about going with a RRA NM flat top. This way I get a 1 in 8 barrel match barrel and a flat top to boot. Later I would change the front sight base out for something low profile, maybe a SPR type gas block. Also maybe put a Samson railed tube on it too. Do you think this would be a good base to start with? Or should I look at something else? I don't want to dump a TON of money into this as this would be just a hobby rifle, not a SHTF or duty type. I don't need a Pac-Nor or Krieger barrel for this build. Is there a better option? TIA
Link Posted: 12/28/2005 5:42:57 PM EST
The better option would be to post this in the BUILDER forum so people can help you.
Link Posted: 12/28/2005 5:48:05 PM EST

Originally Posted By Stickman:
The better option would be to post this in the BUILDER forum so people can help you.

+1. Still stalking ya Stick!
Link Posted: 12/28/2005 6:15:14 PM EST

Originally Posted By Stickman:
The better option would be to post this in the BUILDER forum so people can help you.




Clear on that. I just thought the build forum was for more tech questions. I'll post the question there. Thanks.
Top Top