Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 8/17/2004 4:56:18 PM EDT
Soon to be house has a concrete vault with door (Fort Knox).

Anybody got a good source or design for building rifle racks, or should I just start with 2x4's and have at it? Size range would be from long sticks like 700PSS down to M4gery.

Also considering starting with a cheapie bookcase to make a double stacked rack.
Link Posted: 8/17/2004 5:44:09 PM EDT

Originally Posted By tobycreek:
...or should I just start with 2x4's and have at it?



do that. you'd be surprised what cool designs you could come up with.
Link Posted: 8/17/2004 6:04:00 PM EDT
Check out www.gunstands.com. I have several of the vertical 9-gun racks in my walk in vault. :D]
Link Posted: 8/17/2004 6:04:55 PM EDT
Check out www.gunstands.com. I have several of the vertical 9-gun racks in my walk in vault. :D
Link Posted: 8/17/2004 11:53:59 PM EDT
This guy has some ideas worth looking at:

http://www.7.62x54r.com/MosinID/MosinRacks.htm
Link Posted: 9/19/2004 3:52:47 AM EDT
tag
Link Posted: 9/19/2004 4:21:52 AM EDT
[Last Edit: 9/19/2004 4:30:14 AM EDT by bear3351]
I am going to give this a try.



I have a 2" hole saw, I need to know the right way to cut the wood only 1/2 the hole, the pilot bit will be at the edge of the 1 x 4 ???? How do I do this?
Fo rmore info go to: www.7.62x54r.com/MosinID/MosinRacks.htm
Link Posted: 9/19/2004 4:45:16 AM EDT

I have a 2" hole saw, I need to know the right way to cut the wood only 1/2 the hole, the


Easiest way is to just dril in the middle of a 2x6 and the rip down the center.

Now you have two.
Link Posted: 9/19/2004 4:48:20 AM EDT

Originally Posted By tslex:

I have a 2" hole saw, I need to know the right way to cut the wood only 1/2 the hole, the


Easiest way is to just dril in the middle of a 2x6 and the rip down the center.

Now you have two.



That's good stuff

I was wonderin how to make those things without a fancy shmancy band saw or what have you.

- BG
Link Posted: 9/19/2004 5:17:08 AM EDT
Why not just take 2 2x4's and clamp them together and then use the hole saw to cut the holes. Same principle, you have just completed two of them when finished.
Link Posted: 9/19/2004 5:21:01 AM EDT
[Last Edit: 9/19/2004 5:24:07 AM EDT by bear3351]

Originally Posted By tslex:

I have a 2" hole saw, I need to know the right way to cut the wood only 1/2 the hole, the


Easiest way is to just dril in the middle of a 2x6 and the rip down the center.

Now you have two.



Good idea, except, if I cut wood the way I shoot, one side maybe bigger than the other.

What if I placed the 2 pieces of 1 x 4 side by side together, hold them with a vise and cut the holes with the pilot bit going right in the crack between the 2 pieces?
Link Posted: 9/19/2004 5:23:05 AM EDT
Tagged
Link Posted: 9/19/2004 5:27:15 AM EDT

Originally Posted By inzane123:
Why not just take 2 2x4's and clamp them together and then use the hole saw to cut the holes. Same principle, you have just completed two of them when finished.



That is what I was thinking... I have to go to Home Depot. Crap! my wife has a "TTD list" (things-to-do) for me.
Link Posted: 9/19/2004 6:16:43 AM EDT

Originally Posted By tslex:

I have a 2" hole saw, I need to know the right way to cut the wood only 1/2 the hole, the


Easiest way is to just dril in the middle of a 2x6 and the rip down the center.

Now you have two.



I think this would be the best way... If you clamp two boards side by side and try to drill out from between them with a hole saw it might work but I woud just use one 2X6 or a 1X8 or whatever and then rip it like tslex suggested.
Link Posted: 9/19/2004 6:46:03 AM EDT
Link Posted: 9/19/2004 6:47:41 AM EDT
[Last Edit: 9/19/2004 6:50:38 AM EDT by A_Free_Man]
After varnishing, even stain and varnish (Minwax), lining cutouts and bottom section with carpet (you can get a roll of automotive carpet at Walmart) glued on with contact cement. Contact cement will hold the carpet better than "carpet glue".
Link Posted: 9/19/2004 6:52:26 AM EDT
Even though there in a vault are you going to put a lock bar over them?
Link Posted: 9/19/2004 11:48:33 AM EDT
I am building that rack to show off my rifles, then back to the safe. Or to use it at the range.
Link Posted: 9/19/2004 12:06:05 PM EDT
[Last Edit: 9/19/2004 12:07:33 PM EDT by Leisure_Shoot]
For AR's, look to msnos's products - www.plastixplustx.com/ar15/ar15.html
And he is always looking to develop more, so I bet you could discuss your needs and get him to make anything you need. I have a stand for my AR, and am ready to order a new one.


I love this for a wall mount.


And this
Top Top