Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/13/2006 1:27:55 PM EST
What brand lowers would you think are OK for doing an SBR (registered with $200 tax) build? I've been a Bushmaster guy so far, but I'm open minded
Link Posted: 3/13/2006 1:33:49 PM EST
Depends who like for a logo. That is what it comes down to IMO. The Stag arms have some nice smooth finish on them, but alot of ppl are put off by the deer head. I have a superior arms lower that is nice and what I like is the trigger setscrew under the pistolgrip, takes some of the creep outa the trigger. Otherwise, id go for what one you can get ahold of. RRA, BUSHMASTER, Stag, etc. etc etc
Link Posted: 3/13/2006 1:35:57 PM EST
I just put a LRB together last night and everything went together great. The finish and machining quality was excellent, too.
Link Posted: 3/13/2006 1:39:32 PM EST

Originally Posted By Danner130:
What brand lowers would you think are OK for doing an SBR (registered with $200 tax) build? I've been a Bushmaster guy so far, but I'm open minded




Anything will hold the upper, magazine and trigger group in the right place... as long as you feel the price was right.
Link Posted: 3/13/2006 3:04:52 PM EST
you could save the money you'd spend on a $$$ lower and buy a Superior Arms unit through RB Precision - with the extra money you could use their custom engraving service and personalize it...

Link Posted: 3/13/2006 4:29:51 PM EST
It really does all come down to the logo as most lowers are priced pretty closely. I have 2 SBRs and both are RRA uppers and lowers just beacuse I like their fit and finish and it is what I had on hand (because of their fit and finish). Any and all will fit the bill about the same.
Link Posted: 3/14/2006 1:45:02 AM EST
For fit, finish and $$$ I have been using RRA lowers.
Link Posted: 3/14/2006 3:48:21 AM EST
bushmaster for future rdias/LL purchase
Link Posted: 3/14/2006 4:20:39 AM EST
Thanks, I've got a guy in our IPDA club that is a dealer, He's getting me prices on Stag, RRA & Bushy. Low bidder wins.
Link Posted: 3/14/2006 5:12:36 AM EST
I'm doing an SBR on a MGI Modular lower. That way I can have a SBR 5.56, .308, 7.62x39, 9mm, 45, and .22 in one package. Stag makes them, so they look good.

Link Posted: 3/14/2006 5:32:21 AM EST

Originally Posted By WayneG:
I'm doing an SBR on a MGI Modular lower. That way I can have a SBR 5.56, .308, 7.62x39, 9mm, 45, and .22 in one package. Stag makes them, so they look good.




That's a great idea
Link Posted: 3/14/2006 5:44:09 AM EST
Denny's GTS (by Stag/CMT)
Link Posted: 3/14/2006 5:46:58 AM EST

Originally Posted By comp1911:
Denny's GTS (by Stag/CMT)



please decode
Link Posted: 3/14/2006 5:51:03 AM EST
[Last Edit: 3/14/2006 5:52:12 AM EST by Colt_SBR]
I SBR'ed a Pre-ban Colt lower before the ban expired.

Now I would go with a Colt, Bushmaster, RRA, lower. I don't know.



______________________________



Link Posted: 3/14/2006 5:52:37 AM EST
[Last Edit: 3/14/2006 5:55:41 AM EST by comp1911]

Originally Posted By Danner130:

Originally Posted By comp1911:
Denny's GTS (by Stag/CMT)



please decode



Heh, no problem: GTS Dennysguns (board vendor) has lowers with his company logo and safe/semi safety marking made by CMT/Stag Arms (Stag is the commercial side of CMT - Continental Machine and Tool)

LINK: Denny's GTS Lowers

Wow my build even made it in the ad.
Link Posted: 3/14/2006 7:25:16 AM EST
Thank you sir.
Link Posted: 3/14/2006 7:04:02 PM EST
Link Posted: 3/14/2006 7:06:50 PM EST
KAC
Link Posted: 3/14/2006 8:25:22 PM EST
LAR ,FAR, CMMG ,Bushmaster..
Link Posted: 3/15/2006 7:10:59 AM EST
Global tactical hands down. Up for Denny
Link Posted: 3/15/2006 12:09:39 PM EST
Top Top