I assembled this gun to replace a Spikes built SPR with a WOA barrel. It wasn't shooting as well as I wanted, typically shooting .7-.9 moa with handloads, over moa with factory ammo. GTS had this upper pop up on their site a few weeks ago and I grabbed one. Took it out to the range Saturday to break it in following Kriegers recommendation, then zero and shoot for groups. Shot a mixture of Black Hills and some PPU 75 gr match ammo. My best group of the day with factory ammo on it's first time out was better then my best WOA group after almost a year of tinkering with loads.
I didn't shoot too much at 100 because I wanted to see how 200 yds would work out. I got one group at 200 with no wind, then a gusty 5-10 mph started to blow and my groups started to string horizontally. All groups were 5 shots. With the top group of Black Hills, you'll only see 3 holes. I fired 5 shots at the target, so either I completely missed the paper on two of them, or put them through the same holes. I really can't say.
Upper:
CMT receiver
18" Kreiger SPR profile 1:7.7" middy
LaRue 13.2" rail
Bravo Co auto carrier
Lower:
GTS lower
RRA lpk
WOA tuned 2-stage
Optic:
Leupold Mk 4 3-9x40
LaRue SPR mount
The rifle:
100 yds PPU:
100 yds Black Hills
200 yds BH 77 SMK load. Cold bore shot was in the black as I wanted, then moved up a tiny bit after that. All other groups at 200 were a little over 2" going horizontal.