Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/22/2017 10:05:29 PM
Posted: 10/17/2004 10:22:47 PM EST
My FIRST and ONLY problem in over 4K rounds! Today, I had brass catch up IN BETWEEN the charging handle AND the bolt. I was firing at MY sustained RoF (20-30 RPM), and then, dead trigger: Bolt 2\3 forward, and the forward assist would not help. Closer inspection, saw that the neck of the Winny X193 was lodged in the charging handle hole (hole for the key), and the base of the brass was against the bolt. This allignment was causing pressure so that the C-Handle could not be pulled. So, I took the butt of my knife, and smacked the C-Handle forward: PRoblem solved. After that, I stripped my rifle, inspected thoroughly, and continued to shoot.

Any similar problems? Ideas to fix? PLease, inform me. Thanks in advance.
Link Posted: 10/18/2004 5:17:38 AM EST
[Last Edit: 10/18/2004 5:17:59 AM EST by gmtmaster]
You are doing pretty well at 4K with no hang ups. You cleared the jam and kept on going. I wouldnt worry about it. May have had an out of spec case, or a deformity somewhere.. Crank out another 4K and see if it happens again!!
Top Top