Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 12/29/2002 4:42:35 PM EST
Will the EOTech return to zero after being removed?

Also, those who have the AA version of the EOTech, what type of BUIS do you prefer?

I'm down between the GGG A2 and chopped A3 handle.

Thanks!
Link Posted: 12/29/2002 6:46:53 PM EST
Mine seems to.I use the GG&G now.
Link Posted: 12/29/2002 7:23:22 PM EST
I have lots of luck with my 551 return to zero. I am alway on target with a plus or minus of 1MOA @ 100, anything beyond that, you should always zero check the sight after removal.
Link Posted: 12/30/2002 5:29:41 AM EST
NO! Jack
Link Posted: 12/30/2002 7:13:34 AM EST
Thanks!
Link Posted: 12/30/2002 11:05:13 AM EST
I swap out an Eotech with a Leupold VXII 3X9X40 tactical every now an then depending on what I am wanting to do that day at the range. I would not bet my life on any scope returning to zero with out checking it out on the range first. Rambosky
Link Posted: 12/30/2002 12:19:19 PM EST
Rambosky, do you use a QR mount for the 3X9? If so, what brand?
Link Posted: 1/2/2003 8:41:11 AM EST
Joe, I don't use QR rings. I have Leupold MK4's on the scope. Rambosky
Link Posted: 1/2/2003 8:56:40 AM EST
I've been swapping between my A3 carry handle and my Eotech 551 (depending on whether it's raining or not) for a year now since I last zeroed. I also remove them when cleaning weapons. No problems out to 200M with 8" steel plate targets. Based on that re-zero seems adequate for use against man size targets at the ranges you would expect to use an Eotech. I couldn't tell you if it moved 1 MOA or not (and I really don't care) when I'm shooting at targets of that size at those ranges. I suppose it might be an issue if you *had* to take a precision head shot.
Link Posted: 1/3/2003 4:12:55 PM EST
I thought the spec ops "kit" for the M4 included both an aimpoint and an acog, with the expectation that soldiers would swap the sights as needed. Was it expected that they would always have the opportunity to re-zero while in the field?
Link Posted: 1/3/2003 5:57:56 PM EST
Mine has, but I wouldn't trust it to do so consistently.
Link Posted: 1/3/2003 8:11:56 PM EST
I've also removed/reinstalled mine w/ no appreciable difference in POA/POI.
Link Posted: 1/4/2003 9:40:27 AM EST
I haven't had a chance to test mine, but I just decided to use an ARMS #19A with the 2 throw levers and more permanently locktight my E-O tech, I don't really trust the 1 screw mechanism to return to zero but that is probably just in my head I'll test it first and if the E-O tech comes back closer to zero than my ARMS# 19A, I'll sell the 19A and slap myself up-side the head for being a dumbass.
Link Posted: 1/4/2003 12:57:40 PM EST
GreenO, do you have BUIS? If so, how's it co-witness with the 19A? Thanks!
Top Top