Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/22/2017 10:05:29 PM
Posted: 9/5/2004 8:00:48 PM EST
Does any one have any experience w/ Double Star lowers? Are they good. I know someone who build a carbine on one and it was really tight, actually almost too tight. Any info will be appreciated. Thanks.
Link Posted: 9/6/2004 11:22:03 AM EST
I have not built a Doublestar lower, but from looking at them, they seem to be good quality. Nice finish from the ones I have looked at. They were selling a little high at the G'boro gun show last weekend or I may have picked one up. $145 seemed a little steep. You may already know this, but they are a J&T product. I have used their kits before and have been very pleased with them. They have some of the best LPK's available.
Link Posted: 9/6/2004 11:39:13 AM EST
I picked one up at the local gun shop for 125.00 out the door. Built it for a 20 in BM. Good looks, tight fit, and so far after 8 mo. and several thousands rounds have had zero probs with it.
Link Posted: 9/6/2004 4:07:57 PM EST
I've built around 20 guns using the doublestar lower, never had any problems. I sell them at the local guns shows in mid-TN.
Link Posted: 9/7/2004 5:09:43 AM EST
They are very nice.

Machined nice and fits RRA parts really well.
Link Posted: 9/22/2004 5:57:53 AM EST
Excellent equipment. We sell their lowers at the FFL I do work for.

r/s

Dan
Link Posted: 9/22/2004 9:11:55 AM EST
also bought one a show, no problems here neither
Link Posted: 9/24/2004 11:08:24 AM EST
My partner and I sell the Double Star lowers @ gun shows. We have not run across any prob's w/ fit. I've built one myself w/ 24in hvy fluted and it would shoot 1hole @ 100yds so easily it was boring. Used PMC ammo. The lowers are extremely well made.
Link Posted: 9/24/2004 5:38:24 PM EST
Just so people know, I'm the partner Dakota1911 is talking about. Bout time you got on here!
Link Posted: 9/24/2004 6:15:41 PM EST
I recently purchased two DSC stripped lowers, and built them into complete lowers using J&T Dist. A2 stocks and lower parts kits.

Absolutely no problems. I didn't even have to debur any holes or anything. The finish of the lowers is excellent, with completely smooth surfaces and even finish.

I recommend them highly.

P.S. I have also used RRA, Bushmaster and Colt lowers. On a new build, I would pick either DSC or RRA, with DSC slightly higher on the list than RRA.
Link Posted: 9/25/2004 7:25:32 PM EST
Thanks for the replies guys. I've gotten two of them, and am very pleased. Just as good as the A.B.C. and RRA ARs I've had. I def recomend them to anyone.
Top Top