Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Site Notices
10/30/2020 2:42:12 PM
Posted: 1/3/2004 11:14:47 AM EST
I am debating if I should get this done or not but would like to see what it actually looks like. I seen some pics but would like to see a closeup. I'm currently using a 9mm hammer but would like to be able to use a standard one. Thanks John
Link Posted: 1/3/2004 5:19:59 PM EST
Refer to the pics at [url]www.m60joe.com[/url] or [url]www.c3junkie.com[/url]--refer to the 9mm M16 article.  

You can also find the desired pics in the "AR 9mm FAQ" at the top of this page.
Link Posted: 1/3/2004 5:41:58 PM EST
I was informed that you can just use a std AR hammer for the 9mm.
Just get a DPMS hammer.
Look for my thread on ramping it will show you the correct hammer.
Link Posted: 1/3/2004 5:46:42 PM EST
[img]http://users.zoominternet.net/~subguns/After%20Bolt.jpg[/img]
Link Posted: 1/3/2004 8:29:54 PM EST
If you notice the "side cuts" on the bolt in Joe's pic....This is another reason to get your bolt ramped....They're for Mag lip clearence and I've found these save a lot of headaches associated with out of spec/tweaked mags...Ditto on RunR'ers Recomendation on the modded M16 hammer................UNDERDOG
Link Posted: 1/4/2004 6:27:22 AM EST
[Last Edit: 1/4/2004 6:28:46 AM EST by arjohnson]
Originally Posted By joeblack:
[url]http://users.zoominternet.net/~subguns/After%20Bolt.jpg[/url]
View Quote


Nice job. It also looks like it gets very close to the firing pin like a standard AR carrier. Would I also be able to use a 2-stage trigger with this ramp or do I have to get one of the un-notched hammers as DrugRunR says. Thanks John
Link Posted: 1/4/2004 7:08:15 AM EST
[Last Edit: 1/4/2004 7:09:13 AM EST by underdog75]
Johnson,...I've tried the RRA 2 stage and had no luck...Word has it the deluged M16 hammer can be used with both Ramped/and unramped bolts,..I'm running the ramped bolt and M16 hammer and am running 100%...The RRA 2 stage has the same "profile" on the striking surface as the standard hammers....I haven't seen the Bushmaster 2 stage, so I cant comment...The Knights 2 stage is made for M16's/M4's so maybe they will work,I don't know....I simply used a set of "lightweight" springs and have no complaints.................UNDERDOG
Top Top