Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/22/2017 10:05:29 PM
Posted: 10/14/2004 2:18:00 PM EST
Just got a phantom f/h and crush washer along with a DPMS tool and some blue Loc-Tite. How hard is it gonna be to install the f/h and just how hard do I have to turn the f/h to put it in correctly. I don't have a vise.The Phantom is a 4 slot type.
Any help would be greatly appreciated.
Exnavarm
Link Posted: 10/14/2004 2:37:58 PM EST
Reg Phantom with no solid bottom, you want have to torked it all that tight.
But, If you have the new style Phantom, youll need to use a vise.

TG
Link Posted: 10/14/2004 2:40:23 PM EST
You can do it by hand, but the crush washer needs to crush to lock it on. If you don't want to use a wrench try a screwdriver through the slots of the F/H and turn it enough to be pretty tight, but make sure you don't dent the F/H or Mar it up.

Pinz
Link Posted: 10/14/2004 2:57:26 PM EST
So, not to tight, but enough to lock the f/h with the crush washer. I think I will use the wrench for this, I would hate to mar the Phantom.

Thanks to both of you,
Exnavarm
Top Top