Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 6/16/2003 6:22:16 PM EDT
Just finished putting together my lower receiver... and encountered a problem. The hammer is not being caught by the disconnector, hence when the bolt cycles forward, it hangs up on the hammer. I took this apart and reassembled several times.. but still the same problem; the disconnector spring does not appear to be pushing up the disconnector. The spring that I had for the disconnector has a blue polymer insert in it..... over at Glocktalk, someone said it sounded like this was a extractor spring.... which would explain the issue. Hows this sound to you guys here... any help is appreciated... I really want to get this to the range for some shooting. Thanks in advance for any assistance.
Link Posted: 6/16/2003 6:41:51 PM EDT
That's correct. The spring with the blue polymer insert is the extractor spring.
Link Posted: 6/17/2003 7:31:41 AM EDT
Disconnector spring is just a sping, kind of funnel shaped on one end to help it stick into the trigger.
Top Top