Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 5/4/2003 5:23:20 PM EST
I just put together a Eagle Arms Lower with a DPMS parts kit. The disconnector will not allow the hammer to release. I also used 2 different hammers and triggers. So I assume the disconnector needs to replaced or a few thousands taken off. I don't want to screw anything up so I would like some info.....thanks Chad
Link Posted: 5/4/2003 5:34:51 PM EST
[Last Edit: 5/4/2003 5:38:14 PM EST by LoginName]
Is the disconnector spring in place or binding? Don't file it. Even if that is the problem (out of spec), you'll remove the hardness and over time it would wear down to the point of possibly going full-auto. A new replacement is only a few bucks.
Link Posted: 5/4/2003 5:47:25 PM EST
I feel like a real dumb a** I had the trigger spring backwards.....
Link Posted: 5/4/2003 6:13:59 PM EST
Originally Posted By archad: I feel like a real dumb a** I had the trigger spring backwards.....
View Quote
Don't sweat it; you would have felt like more of a dumb a** if you'd started filing away at the disconnector. [;)] You did the right thing by stopping to think first.
Link Posted: 5/4/2003 6:52:28 PM EST
Yes I did the right thing by looking at this site and the lower assembly pictures. What a great Site!!
Top Top