Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 8/31/2004 11:16:52 PM EST
Well I'm getting everything in order for the 14th and realized the FSP on a new upper is noticably canted to the right. This is a new Bushy upper straight from the company. I suppose I could just fix it when I put a new FSP on, but it's just dissapointing.

Digital
Link Posted: 9/1/2004 3:10:24 AM EST
Or you could send it back to Bushie for a fix, or replacement
Link Posted: 9/1/2004 3:38:20 AM EST
Send it back. I had the same problem. I sent it back and they fixed it. Got it back in about two weeks. No charge. Just paid for shipping to Bushmaster.

Colt_SBR
Link Posted: 9/1/2004 3:39:58 AM EST
Link Posted: 9/1/2004 4:28:25 AM EST
Send it back, this is a know issue with BM.
Link Posted: 9/1/2004 5:53:09 AM EST

Originally Posted By cnorton:
Send it back, this is a know issue with BM.



Happens with quite a few manufacturers actually.
Link Posted: 9/1/2004 9:54:44 AM EST
If you're talking about the FSB it's not always canted. Many times the barrel is not indexed correctly into the slot in the upper receiver.

There is an easy correction for this. Check the Troubleshooting forum, there are several threads about canted barrels, FSB's and shooting too far off to one side.
Link Posted: 9/1/2004 9:55:38 PM EST
Link Posted: 9/2/2004 8:52:23 AM EST
That sucks and if you send it back then you shouldn't have to pay for shipping when the FSP should have been correct when it left Bushmaster.
Link Posted: 9/4/2004 2:37:20 AM EST
Thanks for the advice guys, I think you're right on the barrel not being indexed properly and my smith is gonna fix it for me when I have my sunset goodies put on:D

Digital
Link Posted: 9/4/2004 5:20:48 AM EST
mine was originally like that too, what kind of post assembly QC ARE THEY RUNNING OVER THERE?
sorry for the caplock
Top Top