Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/20/2006 2:26:36 PM EST
Got a RRA 6pos collapsable and I can't back the castle nut off. I have an armorers wrench but it won't budge. Suggestions?
Link Posted: 2/20/2006 2:30:30 PM EST
set it inthe freezer for an hour or so see if that helps ya
Link Posted: 2/20/2006 2:32:10 PM EST
A little heat with a propane torch or a GOOD heat gun to break down the Loctite.
Link Posted: 2/20/2006 2:36:22 PM EST
I was guessing heat, but the freezer?! No heat gun or propane torch, guess I've got an excuse to buy a heat gun. This is really pissing me off.
Link Posted: 2/20/2006 2:39:55 PM EST
I'd give a heat gun a whirl as well.

Hey they're only about $20 and I find it pretty damn useful.
Link Posted: 2/20/2006 2:48:47 PM EST
Link Posted: 2/20/2006 2:58:41 PM EST
Where can I get one for $20?

Stick, I'm using a cheap half circle three prong wrench. Not really a multi function armorers wrench.
Link Posted: 2/20/2006 3:11:47 PM EST

Originally Posted By bigkracka:
Where can I get one for $20?

Stick, I'm using a cheap half circle three prong wrench. Not really a multi function armorers wrench.



I got my heat gun at Ace Hardware I think. I saw some at WalMart the other day for right around $20. They're in the paint department. I bet you can even find one at The Home Depot.



I use the Bushmaster TeleStock wrench (and I'm assuming you have the new style castle nut?)


www.bushmaster.com/shopping/gunsmith/223-telewrench2.asp Only $6.50 on their Site.

Link Posted: 2/20/2006 3:13:09 PM EST
My wrench is very similiar to that one. I'm gonna run to WM.
Link Posted: 2/20/2006 3:16:07 PM EST
I took a hatchet, balanced it on the edge of the castle nut and smacked the hatchet with a hammer....Damn thing spun right off....and you can barely tell where I hit it with the hatchet.
Link Posted: 2/20/2006 3:54:10 PM EST
Got it. Had to get it really hot and get mean with the wrench. Would have been easier with a cheater bar, the wrench handle is too damn short.
Top Top