Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 5/3/2004 12:09:15 PM EDT
I have purchased all the Mil-Comm products and ready to go. I have the degreaser, the thick lube oil and the thin oil along with 91% alcohol. I have a preban colt M4 I shot back in November about 1,000 rounds and never cleaned it. I know I did a bad thing. I want to know what to do if I find rust anywhere. What to do, what not to do, what product(s) to use. Any help is appreciated. Ralph
Link Posted: 5/3/2004 7:39:51 PM EDT
I really do Not think that you will find any rust. Go ahead and disassemble it as per normal cleaning procedure. IF you find any rust, post back again and tell us where exactly the rust is - from there we can offer specific advice.
Link Posted: 5/4/2004 7:04:33 AM EDT
[Last Edit: 5/4/2004 7:05:25 AM EDT by mr_wilson]
Flitz is what I use on rust found on my firearms (which rarely occurs), although, as mentioned, doubt you'll find any (unless you were using corrosive ammo).

It will when used properly remove the rust and leave a protective coating so it don't come back. Ya can find it at any quality gun-shop or it's sold for generally twice what it costs at your local gun-show.

Mike
Link Posted: 5/5/2004 2:49:56 AM EDT
I have used G-96 and FP-10 with a brass brush (same style as issue m16 only brass bristles) with excellent results for removing rust.

Flitz works well.

A slower method I have used was soak the parts in Hopes No.9 for a few months.

Top Top