Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/12/2006 6:50:56 PM EST
Is it stupid to change the free floats on the Bushy Varrmiter? I would like to change the handrails but my Gun Shop is telling me not to touch them, reason I want to change is so I have more options to mount Bipods, etc.
Link Posted: 2/12/2006 7:04:25 PM EST
It's your rifle, do what you think will fit your needs best.
Link Posted: 2/12/2006 7:25:36 PM EST


Why shouldnt you change them?? As long as you stay with free floated hand rails its going to make fuck all for difference.
Link Posted: 2/12/2006 7:53:07 PM EST
+1 on what the others have said.


go to the "build it yourself" forum and at the top there are tacked threads walking you through the various things.
Link Posted: 2/13/2006 2:12:34 AM EST
Good luck getting the current tube off.

First thing you need to do is take a strap wrench to the tube itslef for about 1/4 to 1/2 a turn, back off the locking ring, then finish removing the tube. If you want to replace the barrel nut (you will have to for any other handguard/rail/FF Tube) then whip out the propane torch for the varminter. The gas block is held on with red loctite supposedly, but mine was GREEN. Use a nylon hammer after heating to knock it off . Only took me 2 hours heVarminter FF Tube Removal
Top Top