Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/10/2003 1:04:38 AM EST
I shoot a lot of Wolf through my non-chromed Oly. My chamber cleaning regimen is to chuck an old 45 bronze brush in a cordless drill, soak it in Hoppe's #9 and give it a few passes in and out of the chamber. Am I doing any harm with this? Common sense tells me that the chamber is much harder than the brush, but just want to make sure, especially when it comes to the throat area.


Link Posted: 10/10/2003 1:41:19 AM EST
You might try using the "right" tool, works very well, IMO. [img]http://photos.ar15.com/ImageGallery/IG_LoadImage.asp?iImageUnq=1254[/img] You can get one from GPSS here: [url]http://www.ar15.com/forums/topic.html?b=7&f=25&t=65562[/url] Mike
Link Posted: 10/13/2003 1:55:57 PM EST
Hi all, question on the chamber brush, holder, does the rod spin or is it stationary, or does it matter ?
Link Posted: 10/13/2003 6:18:48 PM EST
[b]Hoppy[/b]: I admit I have on occasion used power tools to remove plastic fouling in smoothbore shotgun barrels. However, your specific application would make me a little nervous given how both small and critical the throat area is. I’d suggest sticking with hand tools. [b]Iceman_1:[/b] It’s stationary and it does matter. A chamber brush is pushed into the chamber area, twisted a turn or two, and then removed. If you’ve got an old military style pistol cleaning rod with a loop on the handle end, it will work too. (Obviously it needs to be long enough and to have the right threads for your chamber brush.) The USGI M16 cleaning rod will also work.
Link Posted: 10/14/2003 11:01:45 AM EST
Thx for the info 199 , I wasn't sure and when I went to the local gun shop to buy one the owner told me just the opposite. Thx again !
Top Top