Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/8/2010 4:07:08 PM EST
The castle nut is not staked from the factory BUT they use loctite... SOB that was a pain. Once I realized I took a lighter to it and it finally came off. One of the threads on the extension tube cross thread to oblivion. Either way I got it off and placed a GG&G single point sling attachment.

Now to the opinion

Gonna build a Spikes lower tonight and I have a RRA LPK and a Spikes LPK. Which do I do? This is my first...
Link Posted: 9/8/2010 4:19:22 PM EST
Both kits ate highly recomended by many...do what you want;-)
Link Posted: 9/8/2010 4:42:34 PM EST
Originally Posted By Gaboonviper85:
Both kits ate highly recomended by many...do what you want;-)

Yeah from what I've read is they are pretty comparable. I have a Spikes standard 6 position M4 stock to go on this one. Also a Magpul ASAP sling plate. The end of this build will most likely be a Spikes M4 LE 16" upper.
Link Posted: 9/8/2010 4:54:04 PM EST
Link Posted: 9/8/2010 9:40:52 PM EST
Did not matter, the Spikes had to take downs pins and no pivot pin...RRA it was, and for a first build, went together very nicely. The hardest part was the Magpul ASAP plate.
Link Posted: 9/8/2010 10:27:32 PM EST
Link Posted: 9/9/2010 5:55:45 AM EST
Called up Spikes (great CS) and they are sending out a a pivot pen.
Top Top