Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 6/7/2003 5:01:29 AM EST
For those that reload their own, does anyone here do this?

-Hobbit
Link Posted: 6/7/2003 5:19:21 AM EST
[Last Edit: 6/7/2003 5:22:51 AM EST by ProfGAB101]
Sure - we used to load up a bunch in 145gr 124gr. But we used to dump many mags worth - was a Colt M16 upper on a Group Ind. Reg Rec M16... So much fun! Since the 9mm is blowback - no gas port/tube to clog up it works fine when you stick to medium loads with heavy bullets - you will still get very good velocity since there barrel lenght is much longer than a pistol.
Link Posted: 6/7/2003 7:46:14 AM EST
[Last Edit: 6/7/2003 5:49:23 PM EST by SBR7_11]
About the only way to feed an Uzi w/124s if you don't mind the smoke, just don't put bare lead through a suppressor, use jackets for that. I've run RCBS mold 124gr RNL-GC at 1350 +/-, no problems, lead soft, barrel last forever. Wheel weights, Hornady Gas check, and blue lube-- [img]www.midwayusa.com/midwayusa/applications/mediasvr.dll/image?saleitemid=562205[/img]
Link Posted: 6/7/2003 1:21:44 PM EST
124's with Bullseye power leaded up the flashhider on my Oly. Didn't hurt anything just a pain cleaning it out.
Top Top