Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 6/16/2003 3:53:18 PM EST
Has anyone got any thoughts on whether or not lock-tighting the carrier key screws in place is sufficient or should they be staked in place in the tradional method. Or what about doing both. This would seem like a bit of overkill, but I thought I would just see what everyone else thinks. Thanks

Scorpion34 OUT!
Link Posted: 6/16/2003 4:53:45 PM EST
The carriers come both ways, staked or just loc-tite, depending on the source. I did both on the one I changed, but the carrier that I removed the key from had just loc-tite, and I did have to drill out one of the screws.
Link Posted: 6/16/2003 5:53:14 PM EST
Loctite softens and let's loose when it gets hot. I would just stake them.
Link Posted: 6/17/2003 10:10:25 AM EST
When you guys stake the key, how much metal are you peening? Not trying to hijack the thread, but I am going through the same dilema right now as well. LocTite is easier, but I want to do it right. On the other hand, I don't want to stake it and not have it be secure enough.... Thanks, and good question!
Top Top