Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
1/22/2020 12:12:56 PM
Posted: 1/18/2015 10:07:50 AM EST
I feel those little "C" clips are going to fall off of my pins with the resultant loss of a pin at a critical moment. Is there a fix besides the "C" clips?

Thanks

Bob
Link Posted: 1/18/2015 10:34:51 AM EST
[Last Edit: 1/18/2015 10:36:18 AM EST by StealthyBlagga]
I bought a cheap pair of anti-walk pins from Amazon for my son's rifle (he has a Timney drop-in modular trigger that likes to walk pins). The pins aren't super tight, and have some side-to-side play, but they are a workable fix for $11 shipped. LINK . For a traditional FCG (i.e. non-modular), I would recommend spending the extra on KNS pins (what I have on all my rifles with JP triggers in them).
Link Posted: 1/18/2015 10:41:27 AM EST
[Last Edit: 1/18/2015 10:43:33 AM EST by PopGunner]
Originally Posted By Bergoobob:
I feel those little "C" clips are going to fall off of my pins with the resultant loss of a pin at a critical moment. Is there a fix besides the "C" clips?

Thanks

Bob
View Quote
You must have an older CMC trigger. The newer models utilize a retention screw that keeps the pins from walking.

Either see if you can get these newer retention screws/pins from CMC...or go the KNS route. Heck, the ones in the above post look like the CMC pins/screws. Why not just give them a go?


Top Top