Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 4/2/2006 5:44:47 PM EST
Changing out my telestock on my calvary arms shotgun stock and wanted to know that once I remove the ring on the stock the tube should come out by hand? I'm guessing that its the same as a regular AR. I have a armors wrench from bushmanster and it has a device to remove the ring, but mentioned nothing about having anything to remove the tube. I plan on building an AR in the near future and thought this would be a good practice exercise. Thanks
Link Posted: 4/2/2006 5:52:32 PM EST
not always I have a Rock River Arms factory lower with the telastock and I was warned that they used locktite at the factory and I would have to use a propane torch until it smoked to burn out the locktite . Good luck.
Link Posted: 4/2/2006 6:03:54 PM EST
Loctite-red,is some bad ass shit.It is considered permanent.
But I guess a torch will help it some.
After you get it off and if you decidde to use Loctite on it,use blue.It's not permanent.
Top Top