Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/22/2017 10:05:29 PM
Posted: 9/14/2004 6:52:55 PM EST
is it common for it to be a severe pain to get this thing on, I've worked it about 1/2 of the way using some of the moly bearing grease, but it's just doesn't seem to want to go further.

I think it's a VLOR or LMT buffer tube, and the lower is a Mega.

there was no problem installing my A2 stock on this same reciever.
Link Posted: 9/14/2004 7:04:58 PM EST
I have 4 MEGA lowers, all different runs (about 100 serial numbers apart and different models)

and no problems with tubes or pins..

-Jason
Link Posted: 9/14/2004 7:12:57 PM EST
Well I finally got it, had to use a vise, I don't think it will ever come off.
Link Posted: 9/14/2004 8:29:34 PM EST

Originally Posted By MudBug:
is it common for it to be a severe pain to get this thing in, I've worked it about 1/2 of the way using some of the moly bearing grease, but it's just doesn't seem to want to go further.




Link Posted: 9/14/2004 8:47:29 PM EST

Originally Posted By Parrandero:

Originally Posted By MudBug:
is it common for it to be a severe pain to get this thing in, I've worked it about 1/2 of the way using some of the moly bearing grease, but it's just doesn't seem to want to go further.







At first I was thinking "WTF!!??!?! why is this guy laughing at me?", then I read that sentance, you're right,
Link Posted: 9/14/2004 9:37:30 PM EST
I had to re-read it two or three times before I got it. More on topic my Mega lower took its buffer tube with no problems at all.
Link Posted: 9/20/2004 3:17:34 PM EST
Try KY Jelly
Top Top