Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/11/2006 12:07:47 PM EST
[Last Edit: 3/11/2006 12:08:44 PM EST by Maxwell71]
Is this buffer to ling for the rifle? Miss fires from 1st round. Doest eject the cart and doesnt feed. Looks like it doesnt go all the way back as well. hope the pics help





Link Posted: 3/11/2006 12:31:56 PM EST
I can only say it is a lot longer buffer than the one in my carbine.

Someone with more knowledge than I might know.
Link Posted: 3/11/2006 12:42:54 PM EST
[Last Edit: 3/11/2006 12:43:40 PM EST by theshootersden]

Originally Posted By NRA2:
I can only say it is a lot longer buffer than the one in my carbine.

Someone with more knowledge than I might know.



A rifle buffer is suppose to be longer than a carbine...
Link Posted: 3/11/2006 12:52:57 PM EST
[Last Edit: 3/11/2006 12:53:44 PM EST by theshootersden]
Maxwell71, Thats the correct buffer...

Is that an A1 stock? Its possible that it has the wrong size screw used to attach the stock body to the buffer tube... The A2 uses a longer screw and if that's an A1 stock with an A2 screw, you will have that trouble...
Link Posted: 3/11/2006 1:40:07 PM EST
I agree with the above post about the screw. Lock back your bolt and look in the ejection port.
The lugs on the bolt should be barely visable in the very aft portion of the port.
If you can see more than the very end of the bolt/bolt carrier then you need the shorter A1 screw.
if you load a mag with one round,fire it and the bolt doesn't lock back that's your problem.
Link Posted: 3/11/2006 1:41:12 PM EST
Thanks, will check it out, its a friends rifle and he couldn't fire it today (beautiful day BTW) Thanks again, will test it out
Link Posted: 3/12/2006 8:14:22 AM EST
EXACTLY the type of question and response that this board is all about..... BRAVO
Top Top