Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/28/2006 7:10:15 PM EST
I'm interested in getting one of their m4 uppers and was wandering if anyone had any experience with them. Maybe someone could give me the pros and cons of these. I would also like to hear ya'lls opions about which lower to get to match this upper.hug.gif
Link Posted: 1/28/2006 7:12:39 PM EST
[Last Edit: 1/28/2006 7:13:28 PM EST by Hylton]
One of the best around, try checking the Feedback Section
Link Posted: 1/28/2006 8:06:55 PM EST
[Last Edit: 1/28/2006 8:15:05 PM EST by Orange_Neck]
If you are referring to their BCM (their own brand) M4 barreled uppers, you'll be getting a true mil spec upper in every respect- F marked FSB, 4150, 1/7, fully chrome lined, gov profile, HPT and MPI barrel, M4 feed ramps, and LASER etched T-marked picatinny rail. If you get the CMT MPI bolt to go with it, it'll be the best complete upper money can buy (well, at least, per the spec on paper anyway).

The best part- it's a great company to deal with.

ETA: When I purchased the BCM 20" upper from Grant of G&R Tactical, CMT upper receiver was used. If that is still the case, a Stag/CMT lower should match nicely (if the deer head trade mark doesn't bother you). Don't know what you meant by matching the lower to the upper. If you were talking about matching the finishing color, who cares, man? It's a firearm, a tool; not a purse. But hey, that's just me. To each his own.
Link Posted: 1/28/2006 8:12:23 PM EST
Thanks for the replys guys. What about the lower which ones seem to match up good with the fit and finish of the bcm upper?

Link Posted: 1/28/2006 8:32:24 PM EST
[Last Edit: 1/28/2006 8:37:17 PM EST by Orange_Neck]
See my ETA above. Bushmaster, Colt, RRA, CMT and anyone who makes a mil spec lower should fit just perfect. My BCM 20" upper fits the Bushmaster lower just fine. The color is a bit off but that bothers me not. Fit and function are a must and not much else. IMHO.
Link Posted: 1/29/2006 5:54:38 AM EST
I agree with you function is by far more important than looks, but if I could get some opions from people that own them then I could get both function and look. They don't have to be an exact match or anything I just don't want one to be light grey and one dark black like some I saw at the gun show yesterdayhug.gif.
Link Posted: 1/29/2006 6:09:39 AM EST
Paul does not screw around when it comes to anything and you should never have a problem.
Link Posted: 1/29/2006 5:09:24 PM EST
[Last Edit: 1/29/2006 5:14:17 PM EST by Orange_Neck]

Originally Posted By silenthunter1984:
They don't have to be an exact match or anything I just don't want one to be light grey and one dark black like some I saw at the gun show yesterday.

If they are still using CMT uppers, I would think a Stag/CMT lower has the best chance of getting the finishing color to match closely. However, I would think that color will still differ from batch to batch even by the same maker.

It's hard to get an accurate representation without natural lighting- but here's what I meant by the color between the Bushmaster and the CMT being "a bit off." Pay particular attention to the area around the bolt latch where there's least amount of over exposure. In my view, we're splittin' hair here when talking about the color being a bit off.
Top Top