Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 6/27/2003 3:23:32 PM EST
I want to attach a Harris bipod to my NM free float handguard. What attachment or how do I go about doing it.
Anybody have an idea?
Thanks, DCS
Link Posted: 6/27/2003 4:57:46 PM EST
[Last Edit: 6/27/2003 4:58:32 PM EST by TriggerFish]
[img]http://www.z06vette.com/gallery/data/500/135bipod.jpg[/img] If you have a bottom rail, or can attach a small segment of Picatinny rail you can use the KAC adapter. I use mine on a FF RAS and on my RIS (shown). -TF
Link Posted: 6/27/2003 5:23:18 PM EST
If no Picatinny rails, use a Harris #5 adapter. [img]http://www.uws.com/HARRISBIPODS/IMG/SmallHarrisAdapters.jpeg[/img] Depending on the size of the mounting hole and gauge of the tube, there will be [b]some[/b] slop/free play. You'll need to improvise a bit by shimming if you want close to zero movement. Once you're satisfied, put some [blue] blue LocTite [/blue] on the threads. One other tip is to check/retighten the bipod thumbscrew every 20 rounds or so because it will loosen up a bit.
Top Top