Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 5/9/2003 5:28:31 PM EDT
Should I put any thing like lube or never seize on the barrel extension before I place it into the upper?
Link Posted: 5/9/2003 6:11:38 PM EDT
I never have.
Link Posted: 5/9/2003 6:52:36 PM EDT
I do. Military manual says yes too. Any molybdenum disulfide grease like you'd find at an auto parts store will do. Apply to barrel extension and threads. Torque 3 times before final alignment of the barrel nut. [img]http://www.imagestation.com/picture/sraid61/p890f1a0b07586d5d164bcf85cb395ad6/fc3707a6.jpg[/img] The grease acts as an anti-sieze agent as well as preventing galvanic corrosion.
Link Posted: 5/9/2003 8:21:22 PM EDT
Link Posted: 5/10/2003 3:13:58 AM EDT
I used some Anti-Sieze. That silver stuff in a silver bottle you can get at any auto parts store. Just brush a little on the threads and wipe off the excess when done.
Top Top