Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 11/13/2003 2:24:34 AM EST
I want to get a new Bushmaster 16" upper with b/c/h. How does the price compare on build vs. buy? Based on my rough calculations, it seems like it's a wash.

Thanks for your thoughts.
Link Posted: 11/13/2003 2:30:59 PM EST
I would say it all depends on what you want...I try to use BM barrrels and then use RRA for all to other parts....If you get used parts it is a whole lot cheaper.
Link Posted: 11/13/2003 2:53:47 PM EST
It all depends on if you have the tools and experience/info to correctly assemble. I buy their barrels and Do it myself. IMO, they have great barrels, if you like 1X9 twist. 646 gives good advise. Regards, Danny
Link Posted: 11/13/2003 4:26:42 PM EST
Thanks guys
Link Posted: 11/14/2003 4:44:32 AM EST
If you want all Bushmaster parts in the upper, it's no cheaper to buy it in pieces and do it yourself. Might as well just get it as a complete upper. Bushmaster doesn't give anyone a big price break on parts, even distributors.
Link Posted: 11/16/2003 5:53:27 PM EST
I built an M-4 upper using a bushy 14.5" 1-7 M4 barrel. Bought all the other parts from other vendors.
Link Posted: 11/17/2003 3:06:12 AM EST
My next will be a Bushy 20" govt profile barrel assy, eagle arms lower, (flat top upper, BC assy, lower parts, and A2 stock) are RRA.
Link Posted: 11/17/2003 5:58:56 AM EST
You can actually save a few dollars by purchasing the upper and barrel assembly seperately from Bushmaster and taking advantage of their free gunsmithing. They will attach the barrel to the upper for free. If I remember correctly, this would save you about $30 over the assembled upper.
Link Posted: 11/17/2003 6:44:23 AM EST
giffmann - good tip. Thanks.
Top Top