Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/22/2017 10:05:29 PM
Posted: 10/21/2004 3:03:07 PM EST
Are there place that sell just the 6.8 specific parts for someone who wants to build a rifle on a budget? I have seen barrels available from Model 1 and magazines from PRI, but have not yet found a place where you can get a bolt.

Also, if anyone is interested, there is now a 6.8 Rem SPC Yahoo group on the net. Everyone is welcome!

Mark
http://groups.yahoo.com/group/68RemSPC
Link Posted: 10/21/2004 3:34:46 PM EST
I'm not sure about parts a la cart, but, contact Wes at www.mstn.biz He has the best 6.8 stuff out there!
Link Posted: 10/21/2004 3:49:02 PM EST
Dpms will be maiking it, but I dunno when the parts will be available
Link Posted: 10/21/2004 4:11:53 PM EST
Model 1 had bolts the last time I talked to them.
Link Posted: 10/21/2004 5:44:14 PM EST
You can also try JTAC Supply
Link Posted: 10/22/2004 8:51:56 AM EST
Thanks for the info. I imagine once the 6.8 gains more popularity, there will be more choices, (Bushmaster, DPMS, RRA, Olympia, etc.)

Mark
Link Posted: 10/22/2004 9:23:18 AM EST
I emailed Bushmasters tech dept and they told me there was no plans to market a 6.8 rifle or upper until a commercially available round is available.

We need a good middle of the road upper the likes BM or RRA could provide.....
Link Posted: 10/22/2004 10:02:05 AM EST
Check the tacked 6.8SPC FAQ.
Link Posted: 10/22/2004 10:04:38 AM EST
[Last Edit: 10/22/2004 10:05:09 AM EST by 89grand]
Model 1 should have bolts since they make complete 6.8 kits.
Link Posted: 10/22/2004 10:12:59 AM EST
I have a question as to the parent case of the 6.8????
Rin diameter?
Length?
Primer size?

Clarence
Link Posted: 10/22/2004 10:14:33 AM EST

Originally Posted By Wrench:
I have a question as to the parent case of the 6.8????
Rin diameter?
Length?
Primer size?
Clarence


READ THE FAQ. IT'S TACKED.
Link Posted: 10/25/2004 5:15:31 AM EST
The 6.8 started out as a .30 Remington case necked down to .270 and shortened to 43mm (compared to 45mm for a .223). I believe it uses a large primer. I have looked at the 6.8 FAQ, and it is a good place to start. Hopefully, load books will start carrying the info once it becomes more popular. In addition, I formed a 6.8 Yahoo group where you can get info.

Mark
http://groups.yahoo.com/group/68RemSPC
Top Top