Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/22/2017 10:05:29 PM
Posted: 10/9/2004 8:07:55 AM EST
For anyone who has a postban fixed stock that they cannot got off because its lock tighted heres your solution. Take a dremul tool grind down two sides until you are almost or are to the threading of the stock. Then take a screw driver (flat head) put it under neath the ring and pry it up and off. Once you get it off goth sides just fall off. This is all done with minimal damage to the threading. And then all you have to do is install the new stock.
Link Posted: 10/9/2004 11:07:48 PM EST
You can also use a "breaking device" which is a pipe to place over the wrench's end to give more leverage. It'll pop loose in an almost crazy-easy way.
Link Posted: 10/10/2004 12:39:15 AM EST
why don't you just drill through the center of the tube, and stick a rod (i.e. long screw driver) and use that as a lever?
Top Top