Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 4/23/2003 2:52:22 AM EST
I want to mount a conventional tube scope with a 40mm objective on my Bushy 20" flat top. I am considering getting the Armalite one piece mount.

I was hoping someone here has used this mount and could tell me a few things. First, how's the height of this mount in regard to cheek weld? Second, height in regard to the front site? I was told here earlier that the front site will not obstruct my view thru the scope. I hope this is true. The mag range is 3x - 10x.

I guess what I'm asking is if this mount is a good way to go for me or should I be considering another mounting option. Thanks as always for any suggestions offered.

Link Posted: 4/23/2003 1:57:42 PM EST
Link Posted: 4/23/2003 7:23:11 PM EST
[Last Edit: 4/23/2003 7:23:57 PM EST by Smokeless]
Troy is on it dbshabo. I use an Armalite 1pc with a 3x-9x on an M4. For me, it felt way tight on the receiver. I added an ARMS 38 and the mount now is .46" higher. Feels great and accuracy is 100%. As for the front sight, I don't see it, whether at 3x or 9x.
Link Posted: 4/24/2003 1:48:20 AM EST
Thanks guys. Gonna order one from Quantico today. Shabo
Link Posted: 4/24/2003 7:03:13 PM EST
That would be the way to go. Here is one on my 24" Bushy flat-tap, Varminter, with a Leupold LR Tact M1, 4.5x14 50mm scope: [img]http://www.fototime.com/5B90BCD108AB2CB/standard.jpg[/img]
Link Posted: 4/24/2003 7:13:24 PM EST
RRA's is as nice, and half Armalite's price...
Link Posted: 4/24/2003 7:38:59 PM EST
Link Posted: 4/25/2003 10:56:26 AM EST
I've got the Armalite with a 4-16x42 and it works great. By my measurements it's about 1/8" lower than the irons, but cheek weld is still good. The RRA mount appears to be about 1/2" taller than the Armalite.
Link Posted: 4/25/2003 11:39:58 AM EST
If you purchased a Armalite A4. You get the mount free. FYI.
Link Posted: 5/5/2003 5:49:19 PM EST
If I put the Armalite 1" mount on a #38 standard, would the eye bell clear the rear sight? (Leupold 3.5-10x40//1.6"eye bell dia.) Or should I get a K's 300m ? will that fit behind the Armalite mount? Is there an old Armalite mount and one newer that is higher. Thanks for the info Mark
Link Posted: 5/5/2003 9:10:00 PM EST
38 will raise it too high. Use the 600 for a precision rifle IMHO not the 300.
Top Top