Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/6/2003 8:57:13 AM EST
I buddy of mine gave me a can of Moly Coat (molybdenum disulfide) spray on dry film lubricant. I was thinking about spraying my magazine springs with this stuff. Are there any other uses for the stuff on AR's?
Link Posted: 10/6/2003 9:12:24 AM EST
why the mag springs?, if it is a good dry lube, do the followers, and the inside of the mag body, but do not waste it on the springs
Link Posted: 10/6/2003 10:44:05 AM EST
What if you sprayed it onto the inside of the upper receiver? Would that provide any benefit?
Link Posted: 10/6/2003 1:43:44 PM EST
Bushmaster sprays it inside their reciever extensions and uppers to help with break in. A few cleaning swith CLP will remove it though. A single good scrubbing with Gunscrubber will remove it too. I would just use it to refinh your magazine bodies.
Link Posted: 10/6/2003 4:28:11 PM EST
i use it in my upper all the time with very little oil. makes my gun feel so much smoother than with none on it. also i guess it might keep it from braking in ?
Link Posted: 10/6/2003 5:17:11 PM EST
No it wont prevent break in.
Top Top