Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 8/16/2005 2:06:01 PM EDT
I'm thinking about having Accuracy Speaks put a trigger in my next build. If I do, there's no point in paying for the standard trigger in a lower parts kit. Does anyone sell kits without the trigger? Or do I just have to identify all the individual parts and buy them separately?
Link Posted: 8/16/2005 2:08:01 PM EDT
[Last Edit: 8/16/2005 2:08:54 PM EDT by eklikwhoa]
i would just buy the lpk and save the trigger/hammer for backup.

start a spare parts bin if the trigger was to go tits up you still have the factory trigger to throw back in there
Link Posted: 8/16/2005 2:09:30 PM EDT
FTF Industries. They have a so-so reputation, but it fits the bill, except this one doesn't have a selector.

Link Posted: 8/16/2005 2:13:16 PM EDT
[Last Edit: 8/16/2005 2:16:08 PM EDT by Essayons]
LOL eklikwhoa - I figured I'd get that response. That's the route I'll probably go, but I'd still like to know if anyone sells parts kits without the trigger.

I've only built one AR and only own 2 1/2 (two lowers and three uppers) but I already have quite a parts bin - a bunch of sight components, an extra bolt and carrier, extra action springs and an extra set of A1 furniture.

Mongo - Thanks. I get a lot of good info from you. The link says the parts are Bushmaster.
Link Posted: 8/16/2005 2:21:22 PM EDT
[Last Edit: 8/16/2005 2:22:09 PM EDT by mongo001]

Originally Posted By Essayons:
Mongo - Thanks. I get a lot of good info from you. The link says the parts are Bushmaster.

That is very likely a lie, as they have in the past tried to sell complete uppers as "Bushmaster" that clearly were not Bushmaster. No barrel stampings or anything else that would indicate that they were. That's the so-so reputation I mentioned.

I've used these kits in the past without issue. They are, essentially, non essential parts. I wouldn't buy anything I consider essential from them - barrel, bolt or FCG.
Link Posted: 8/16/2005 2:27:40 PM EDT
ADCO has them on their WhiteOak Armamant page.
Link Posted: 8/16/2005 2:41:53 PM EDT

Originally Posted By JoelK:
ADCO has them on their WhiteOak Armamant page.

Thanks. At $49, it would only save me $15 compared to the first Stag/CMT parts kit I found on EE. I'll have to take the time to price the parts individually at some reputable vendors.
Top Top