Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 9/7/2005 12:02:45 PM EDT
I purchased a Basic Modstock and when I attempted to attach it to the receiver extension, it became quite clear the fit was too tight. This was with a DPMS M-4...before I start on my Bushy, will I have the same problem?
Link Posted: 9/7/2005 12:09:48 PM EDT

Originally Posted By scuba_ed:
I purchased a Basic Modstock and when I attempted to attach it to the receiver extension, it became quite clear the fit was too tight. This was with a DPMS M-4...before I start on my Bushy, will I have the same problem?



Got the wrong tube size, buddy. And people wonder why I like Colt.
Link Posted: 9/7/2005 12:10:29 PM EDT
OK. Easy fix. Get the proper size tube from VLTOR, Colt, LMT. They are out there.
Link Posted: 9/7/2005 12:14:34 PM EDT
[Last Edit: 9/7/2005 12:14:55 PM EDT by Feedingcannibal]

Originally Posted By scuba_ed:
I purchased a Basic Modstock and when I attempted to attach it to the receiver extension, it became quite clear the fit was too tight. This was with a DPMS M-4...before I start on my Bushy, will I have the same problem?



Yes. Your Bushie tube is not milspec. You gotta have what Combat_Jack says.
Link Posted: 9/7/2005 12:22:32 PM EDT
Thanks!
Link Posted: 9/7/2005 12:26:22 PM EDT
If you have a beard...you may have problems

Link Posted: 9/7/2005 12:38:40 PM EDT
If you want, fill the cheek portion of the stock will resin or maybe even model glue. Just don't try to take it apart again.
Link Posted: 9/7/2005 12:50:26 PM EDT
no prob with the beard,

only 'bouta 300 rds,though.

Link Posted: 9/7/2005 3:25:08 PM EDT
Stag Arms/ CMT will also work. They're are Mil-Spec size and depending on which seller you buy it from, it could be less cost than the other major brands.

I have a CAR Vltor stock on an LMT tube and a club foot stock on a Vltor tube, both fits fine.
Link Posted: 9/7/2005 3:55:51 PM EDT
Black electrical tape on my black VLTOR clubfoot solved the beard problem. Nothing like having an AR hanging from your face. Been there, done that, don't want to do it again!
Link Posted: 9/7/2005 4:26:04 PM EDT
Mil-Spec = Stag/CMT, Vltor, Crane, Colt

Non Mil-Spec = Bushmaster, RRA, CavArms, DPMS


You need a mil-spec extension to work with your Vltor stock.
Top Top