Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/11/2002 4:20:37 AM EST
I just got my Model B fixed and am ready to load up some 9mm for it, does anyone have some pet loads for carbines? I will initially be using 124g round nose for good feeding. I have one manual that shows rifle loads, but they appear to be weak; ie 124g @ 125 fps.
Link Posted: 10/11/2002 11:28:57 AM EST
I use AA-#7 for full power 124 loads-8gr-8.5gr works well. Chrono'd 124 lead w/gas check (RCBS mold) at 1338 avg from 10.25" 6 groove 1x10 RH twist barrel, and 1331 avg from the IMI 16" pipe.

AA-#5 works well, as w/Blue Dot, although bulky (Blue Dot). I use 5gr of #5 or VV 3N37 for my 147 sub-sonic loads. Don't bother w/115's, and use mid speed powder.
Link Posted: 10/18/2002 1:24:55 PM EST
I tried out a load using 8.1g Blue Dot with 124g Remington RN, 10 rds: Lo 1403 fps, Hi 1450 fps, Ave 1431 fps, ES 46.75, SD 13.49. This from a Model B Uzi with 16" barrel, Chrono 10' from muzzle. Looks like a keeper to me, though I don't think I'll shoot any in my pistols!
Link Posted: 10/18/2002 2:14:00 PM EST
My .45 cal UZI eats anything =)

2" MOA (1" at 50 yards) is kinda nice too!

Suppressor is fake, just used as a sight mount.

Link Posted: 10/18/2002 3:58:35 PM EST
walmart has 100rd boxes of winchester 115 grain for $10.96 it stopped me from reloading 9 mm. you may want to run the cost of components.Now if they would do this to 45 acp.................
Top Top