Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 8/30/2004 7:49:45 PM EST
[Last Edit: 8/30/2004 7:52:43 PM EST by AZ_Dragoon]
I tried the search function for this company, but nothing came up. Considering purchasing a couple of complete rifles from them, but would like to get some feedback first since I am not familiar with, nor seen, their products in person. Was leaning toward Oly and/or DMPS for these two weapons, but it would be nice to buy "homegrown."
Could save at least $300 by purchasing the similar AR's from Oly and DMPS, but $ is not a factor when it comes to quality, reliability, and accuracy in my book. Anyone care to state the advantages of Ameetec AR'15's over most
of the other manufacturers out there. If price is any indication, quality must be higher. Please, straight to the point answers/opinons and no "I own a RRA or some such and so recommend them."

Kevin
Link Posted: 8/30/2004 7:54:43 PM EST
The finish on the Ameetec receiver I got was better than on my Bushmaster. The lower parts kit went in no problem, but I have not fired it yet.
Link Posted: 8/30/2004 8:02:50 PM EST
I will let you know when mine show up
Link Posted: 8/30/2004 8:04:09 PM EST

Originally Posted By AZ_Dragoon:

I tried the search function for this company, but nothing came up.
Kevin



AMEETEC ARMS
Link Posted: 8/30/2004 9:34:30 PM EST
Phessor,

Yeah definitely post when get them.

I already printed and reviewed their website many times and have been in contact with Warren. Just would like to hear from owners of their rifles and parts. The info on their finish is appreciated howlie and is a plus in their favor, but alone is not enough to justify the extra $300-400 bucks yet (could buy 3-4 lowers plus some small parts for this amount, even Armeetec lowers).

Kevin
Link Posted: 8/31/2004 2:41:59 AM EST
I recently picked up an Ameetec stripped lower, and the lpk install was perfect. I'll let you know how it shoots after the 13th.
Link Posted: 8/31/2004 10:34:32 AM EST

Originally Posted By rnewberry:
I recently picked up an Ameetec stripped lower, and the lpk install was perfect. I'll let you know how it shoots after the 13th.



My Ameetec lower looks great, but I likewise can't tell you anything for sure 'till the ban sunsets. I think you'll find that most people in AZ consider Warren to be a good guy, though.
Link Posted: 8/31/2004 12:52:48 PM EST
have a couple of these ameetec lowers and for the price they cant be beat. very nice fit and finish everything went together perfect and upper-lower fit was nice and snug
Link Posted: 8/31/2004 1:45:53 PM EST
... LPK assembled just fine into Ameetec lowers



Link Posted: 8/31/2004 1:58:14 PM EST
I also picked up a LPK, Tac latch, and a lower.
The lower is VERY nice, equal to or better then a RRA.
The individual components (Tac latch & LPK) fit nice and function flawlessly. Thier attention to detail is worth noting.

I don't think you will regret going to Ameteec for the AR.
Link Posted: 8/31/2004 3:29:57 PM EST

Originally Posted By Winston_Wolf:
... LPK assembled just fine into Ameetec lowers

members.cox.net/stevenaz1/i.jpg

members.cox.net/stevenaz1/l.jpg



How did you get yours so fast???
Link Posted: 8/31/2004 3:36:56 PM EST
Link Posted: 8/31/2004 4:13:56 PM EST
Winston_Wolf- that is a clean & neat workbench! I'm envious!
Link Posted: 8/31/2004 6:10:45 PM EST
I have a couple of their lowers on order as well.
Link Posted: 8/31/2004 6:42:31 PM EST

Originally Posted By Phessor:

Originally Posted By Winston_Wolf:
... LPK assembled just fine into Ameetec lowers

members.cox.net/stevenaz1/i.jpg

members.cox.net/stevenaz1/l.jpg



How did you get yours so fast???



... I know people

... And that "workbench", it's a three-piece oak cover for my pool table. Better shot here:



Link Posted: 9/1/2004 6:56:59 PM EST
I'm just curios. Is Ameetec the same company as VM Hy-Tech???
Top Top