

Page ownage.
![]() Using ammoseek for 9mm and the prices range from $220 - $250, but after inserting the information the total cost is closer to $300. One had a $70 shipping cost. Looks like I am definitely waiting. |
|
I can't think of anything to say. Nada, zip, nothing.
|
Originally Posted By --bullseye--: Shoot, not a deal then. Thanks for checking. View Quote I did send them an e-mail. Originally they stated there was no issue. Long story short (after a few e-mails back/forth), they did call and said there was an issue as they are modifying their interface. Even though the coupon was expired, they would still honor it.....yeah!!!!, but not going to exclude the shipping....booo!!!!! Said it is no longer a deal and opted not to purchase it. |
|
I can't think of anything to say. Nada, zip, nothing.
|
Originally Posted By --bullseye--: You might be able to find some slightly cheaper reloads/remans with the ammoseek link. If you want factory ammo I think this would probably be cheapest (free shipping over $200 currently, automatically applied at checkout): https://www.outdoorlimited.com/armscor-38-special-ammunition-50449-158-grain-full-metal-jacket-pack-of-500-rounds/ Followed by this (free shipping over $200): https://www.sgammo.com/product/38-special-ammo/500-round-can-38-special-132-grain-fmj-pmc-ammo-38g-packed-m19a1-canister View Quote Thanks, I'm going to use sgammo then. |
|
The tacticool crowd are the fudds of the outdoors. There I said it. -Geralt55
|
Originally Posted By JThompson: Page ownage. ![]() Using ammoseek for 9mm and the prices range from $220 - $250, but after inserting the information the total cost is closer to $300. One had a $70 shipping cost. Looks like I am definitely waiting. View Quote You need to use the narrow search function. Try this 25 cpr shipped https://ammoseek.com/ammo/9mm-luger?ca=brass&co=new&sh=lowest |
|
|
Originally Posted By tstorms: You need to use the narrow search function. Try this 25 cpr shipped https://ammoseek.com/ammo/9mm-luger?ca=brass&co=new&sh=lowest View Quote Thanks, still best I can find is about $275 shipped. Fingers crossed for another price drop or two which I do hope happens soon. ![]() |
|
I can't think of anything to say. Nada, zip, nothing.
|
Natchezss at it again.
New code out today for free shipping, but no discounted price. Guess what, the prices is the same as previous. Well, actually more because when entering in the code, it returns "Error, code is invalid." |
|
I can't think of anything to say. Nada, zip, nothing.
|
So basically, you are no better off with their pricing it remains within a few dollars the same without shipping
|
|
|
AAC (owned by JJE who also owns PSA) just launched their 40gr Vmax version of their own 5.7x28mm loading :D $29.99/50.
AAC 5.7 40gr Vmax |
|
|
Originally Posted By trekgod3: Just shot 100 rounds of this zincpoint 223 last week. Ran perfectly, grouped great, zero problems or malfunctions. I keep checking their website daily , hoping they'll restock View Quote Hey, thanks for the update and mini review. That is nicely reassuring. ![]() I was looking at the headstamps but was baffled. There is an "A" at 11 o'clock, "USA" at 1 o'clock and "223 REM" at the 6 o'clock area but I don't know who the manufacturer is. Is it Zinc Point and their "Still American" (A for American?) brand or something else? It doesn't seem like they are a manufacturer but just a distributor only. |
|
|
From what I googled, zincpoint is the manufacturer of Still
|
|
|
View Quote I might be wrong, but it looks like prices are somewhat stabilizing (which will all change in Nov 2024), can you post pre Covid prices? Keep up the good work, really appreciate it! |
|
|
Anyone else receive the e-mail for a 1,000s of PMC for $219???
Awesome price. Only $67 for shipping!!!!!!!! |
|
I can't think of anything to say. Nada, zip, nothing.
|
What man is a man who does not make the world a better place!!!
Oh and by the way... FUAC |
Originally Posted By wtwining: I might be wrong, but it looks like prices are somewhat stabilizing (which will all change in Nov 2024), can you post pre Covid prices? Keep up the good work, really appreciate it! View Quote View All Quotes View All Quotes Originally Posted By wtwining: I might be wrong, but it looks like prices are somewhat stabilizing (which will all change in Nov 2024), can you post pre Covid prices? Keep up the good work, really appreciate it! I would assume those spikes are from UK war starting and Buffalo/Uvalde shooting? |
|
"Makes me realize why there are warning labels on hemorrhoid cream about not using it orally" - Weomi
Save VA, Join or Donate to VCDL! https://www.vcdl.org/Donate |
Originally Posted By StarCityShooter: I would assume those spikes are from UK war starting and Buffalo/Uvalde shooting? View Quote View All Quotes View All Quotes Originally Posted By StarCityShooter: Originally Posted By wtwining: I might be wrong, but it looks like prices are somewhat stabilizing (which will all change in Nov 2024), can you post pre Covid prices? Keep up the good work, really appreciate it! I would assume those spikes are from UK war starting and Buffalo/Uvalde shooting? The inbound price hikes for 2024 are going to be ridiculous ![]() |
|
What man is a man who does not make the world a better place!!!
Oh and by the way... FUAC |
Originally Posted By Oppressor: Hey, thanks for the update and mini review. That is nicely reassuring. ![]() I was looking at the headstamps but was baffled. There is an "A" at 11 o'clock, "USA" at 1 o'clock and "223 REM" at the 6 o'clock area but I don't know who the manufacturer is. Is it Zinc Point and their "Still American" (A for American?) brand or something else? It doesn't seem like they are a manufacturer but just a distributor only. View Quote Chances are they are using someone else's cases and loading it at there facility. |
|
Fuck Cancer. Love you Pop.
|
Originally Posted By Dee_NY: The inbound price hikes for 2024 are going to be ridiculous ![]() View Quote View All Quotes View All Quotes Originally Posted By Dee_NY: Originally Posted By StarCityShooter: Originally Posted By wtwining: I might be wrong, but it looks like prices are somewhat stabilizing (which will all change in Nov 2024), can you post pre Covid prices? Keep up the good work, really appreciate it! I would assume those spikes are from UK war starting and Buffalo/Uvalde shooting? The inbound price hikes for 2024 are going to be ridiculous ![]() I assumed just the typical hikes around the election…is there something else I’m missing for why 2024 is going to bring crazy price hikes? |
|
|
If in doubt, buy it cheap (now, while it's still available) before it gets even higher. same for primers and powder if you reload.
|
|
The tacticool crowd are the fudds of the outdoors. There I said it. -Geralt55
|
|
Originally Posted By Oppressor: Hey, thanks for the update and mini review. That is nicely reassuring. ![]() I was looking at the headstamps but was baffled. There is an "A" at 11 o'clock, "USA" at 1 o'clock and "223 REM" at the 6 o'clock area but I don't know who the manufacturer is. Is it Zinc Point and their "Still American" (A for American?) brand or something else? It doesn't seem like they are a manufacturer but just a distributor only. View Quote View All Quotes View All Quotes Originally Posted By Oppressor: Originally Posted By trekgod3: Just shot 100 rounds of this zincpoint 223 last week. Ran perfectly, grouped great, zero problems or malfunctions. I keep checking their website daily , hoping they'll restock Hey, thanks for the update and mini review. That is nicely reassuring. ![]() I was looking at the headstamps but was baffled. There is an "A" at 11 o'clock, "USA" at 1 o'clock and "223 REM" at the 6 o'clock area but I don't know who the manufacturer is. Is it Zinc Point and their "Still American" (A for American?) brand or something else? It doesn't seem like they are a manufacturer but just a distributor only. Might want to watch this before buying zincpoint ammo. There are other vids of it doing the grenade too. ![]() The Ammo that Blew Up in my Face |
|
|
|
|
I can't think of anything to say. Nada, zip, nothing.
|
Originally Posted By smitty_007: I assumed just the typical hikes around the election…is there something else I’m missing for why 2024 is going to bring crazy price hikes? View Quote View All Quotes View All Quotes Originally Posted By smitty_007: Originally Posted By Dee_NY: Originally Posted By StarCityShooter: Originally Posted By wtwining: I might be wrong, but it looks like prices are somewhat stabilizing (which will all change in Nov 2024), can you post pre Covid prices? Keep up the good work, really appreciate it! I would assume those spikes are from UK war starting and Buffalo/Uvalde shooting? The inbound price hikes for 2024 are going to be ridiculous ![]() I assumed just the typical hikes around the election…is there something else I’m missing for why 2024 is going to bring crazy price hikes? Well the war in UK probably isn't going to end anytime soon, so for now demand and prices are still very high. Components are also in short supply according to manufactures and that's not going to change anytime soon. So if prices are going to level out where they are now for say all of 2023, what will 2024 look like, especially as we get closer and closer to the election. Yeah, will see the typical price gouging and panic buying, but to what extent. Just how bad is the election year going to impact the market? I can see this one being just as bad if not worse then the Clinton's and OB elections. The idea of 4 more years of the insanity we have witnessed thus far, inflation, division, uncertainty, draconian ideology in every facet of our lives, and the blood lust from the left to control and change this country forever is quite evident. To what extent will that affect supply, demand and prices, well will see soon enough... |
|
What man is a man who does not make the world a better place!!!
Oh and by the way... FUAC |
View Quote Good deal, unfortunately it looks like the sale is over now. |
|
What man is a man who does not make the world a better place!!!
Oh and by the way... FUAC |
Originally Posted By Dee_NY: Well the war in UK probably isn't going to end anytime soon, so for now demand and prices are still very high. Components are also in short supply according to manufactures and that's not going to change anytime soon. So if prices are going to level out where they are now for say all of 2023, what will 2024 look like, especially as we get closer and closer to the election. Yeah, will see the typical price gouging and panic buying, but to what extent. Just how bad is the election year going to impact the market? I can see this one being just as bad if not worse then the Clinton's and OB elections. The idea of 4 more years of the insanity we have witnessed thus far, inflation, division, uncertainty, draconian ideology in every facet of our lives, and the blood lust from the left to control and change this country forever is quite evident. To what extent will that affect supply, demand and prices, well will see soon enough... View Quote Good points…sounds like I need to buy some more 9mm! |
|
|
On Ammoseek the last few months "Pro Armory" shows awesome prices, but they look too awesome.
Is this place GTG? |
|
|
|
Originally Posted By Macchina: On Ammoseek the last few months "Pro Armory" shows awesome prices, but they look too awesome. View Quote What prices are you looking at? They are selling CCI Blazer 9mm Luger 124 Grain Full Metal Jacket for $299 before shipping and tax. This is the same ammo everyone else is selling for around $250 or so. |
|
I can't think of anything to say. Nada, zip, nothing.
|
Not sure if this is true for Pro Armory, but a lot of the sites on Ammoseek post prices that seem to good to be true - i.e. .28 per round for PMC. You end up adding a bunch to your cart, set up an account with a password, input all of your info and then get to the last screen where they inform you that they want to charge $80 to ship the stuff to you. I find there are generally three or four places I keep coming back to - SG Ammo, PSA (their AAC ammo is the tits), sometimes Midway for IMI, occasionally LAX. Probably forgetting a couple of others. Not a fan of most of these sites.
|
|
|
Originally Posted By Pippinone: Not sure if this is true for Pro Armory, but a lot of the sites on Ammoseek post prices that seem to good to be true - i.e. .28 per round for PMC. You end up adding a bunch to your cart, set up an account with a password, input all of your info and then get to the last screen where they inform you that they want to charge $80 to ship the stuff to you. I find there are generally three or four places I keep coming back to - SG Ammo, PSA (their AAC ammo is the tits), sometimes Midway for IMI, occasionally LAX. Probably forgetting a couple of others. Not a fan of most of these sites. View Quote Pretty much this, you have to fill out all the info just to find out they have a cap on how much you can buy, then you learn they charge tax, along with an insurance fee and then you get slapped in the face with the insane shipping fee, lol... absolutely NUTZ... I have to say I've been pretty lucky in finding 9mm from anywhere btw 300 - 250 delivered since the beginning of 2022, lower prices most recent of course. I try to make my purchase during holiday sales to get the best possible deals, buy in large bulk if possible and make it last until the next holiday. I also tend to stick to brands I know and trust, big fan of IMI, Win Nato, Federal, PMC/CCI, Freedom Munitions, and have also recently used the Igman, and Magtech all in 124 grain without any issues whatsoever, in fact I just recently went through a case each of the Ig and MagT and can happily report they were GTG. As for all the other brands mentioned here, I unfortunately have no experience them. |
|
What man is a man who does not make the world a better place!!!
Oh and by the way... FUAC |
45 cents per round shipped for full power M193!
https://www.velocityammosales.com/products/5-56-nato-winchester-m193-55-grain-fmj-case |
|
|
Originally Posted By Blain: 45 cents per round shipped for full power M193! https://www.velocityammosales.com/products/5-56-nato-winchester-m193-55-grain-fmj-case View Quote Not a great price |
|
|
|
Originally Posted By cmsnare: Really? PMC 55gr 5.56 at $440/k shipped has been about as good as I've seen recently - where are you finding better? View Quote You don't unless it's .223. Poster doesn't know what he's talking about. Also, PMC had the lowest velocity of all the 55 grain 5.56 loads I tested. Not even close to M193 spec. It's like an inbetween 223 and 5.56. After seeing that I would never buy it again. |
|
|
Originally Posted By Blain: You don't unless it's .223. Poster doesn't know what he's talking about. Also, PMC had the lowest velocity of all the 55 grain 5.56 loads I tested. Not even close to M193 spec. It's like an inbetween 223 and 5.56. After seeing that I would never buy it again. View Quote View All Quotes View All Quotes Originally Posted By Blain: Originally Posted By cmsnare: Really? PMC 55gr 5.56 at $440/k shipped has been about as good as I've seen recently - where are you finding better? You don't unless it's .223. Poster doesn't know what he's talking about. Also, PMC had the lowest velocity of all the 55 grain 5.56 loads I tested. Not even close to M193 spec. It's like an inbetween 223 and 5.56. After seeing that I would never buy it again. Funny, I'm actually down to my last case of PMC, and can definitely use some more, but not at those prices... I hear what your saying about it being under powered, nothing near xm193 of course, but it does just fine for range work, at least in my experience. In fact, if memory serves correctly, my oldest daughter was hitting targets out to 400-500 yards with PMC at a West point shoot back in say, 2010. Now with that said, is it possibly that the older PMC 223 was loaded at higher pressures in comparison to what's being manufactured today, in a post Covid world? I have no idea, however I do know when it comes to choosing ammo, it is most certainly mission driven like everything else, you need the right tools for the right job. |
|
What man is a man who does not make the world a better place!!!
Oh and by the way... FUAC |
Originally Posted By Blain: You don't unless it's .223. Poster doesn't know what he's talking about. Also, PMC had the lowest velocity of all the 55 grain 5.56 loads I tested. Not even close to M193 spec. It's like an inbetween 223 and 5.56. After seeing that I would never buy it again. View Quote View All Quotes View All Quotes Originally Posted By Blain: Originally Posted By cmsnare: Really? PMC 55gr 5.56 at $440/k shipped has been about as good as I've seen recently - where are you finding better? You don't unless it's .223. Poster doesn't know what he's talking about. Also, PMC had the lowest velocity of all the 55 grain 5.56 loads I tested. Not even close to M193 spec. It's like an inbetween 223 and 5.56. After seeing that I would never buy it again. Oh really? Look for it yourself then,its out there. 55 grain is practice plinking ammo for me,no need for m193 velocity. |
|
|
Please get your arguments out of here, especially those fussing about the prices of those posting links no matter what you feel about them. Or post links yourselves if you think you can do one up instead of petty arguments over yesteryears cheaper ammo.
|
|
The tacticool crowd are the fudds of the outdoors. There I said it. -Geralt55
|
Originally Posted By FlyLeaf: Oh really? Look for it yourself then,its out there. 55 grain is practice plinking ammo for me,no need for m193 velocity. View Quote View All Quotes View All Quotes Originally Posted By FlyLeaf: Originally Posted By Blain: Originally Posted By cmsnare: Really? PMC 55gr 5.56 at $440/k shipped has been about as good as I've seen recently - where are you finding better? You don't unless it's .223. Poster doesn't know what he's talking about. Also, PMC had the lowest velocity of all the 55 grain 5.56 loads I tested. Not even close to M193 spec. It's like an inbetween 223 and 5.56. After seeing that I would never buy it again. Oh really? Look for it yourself then,its out there. 55 grain is practice plinking ammo for me,no need for m193 velocity. So there you have it, you want to buy .223 because its the cheapest plinking ammo then fine. For those who want serious duty M193, that is the best price you can get. If you've seen my ammo tests you know that I know the best m193 clones out there. If all you need is .223 Aquilla for plinking, then stick to that. Don't see the relevance in you bad mouthing the cheapest available M193 spec ammo around though? Seriously, that's like someone posting a great deal on federal fusion and you popping up with "I can get x brand soft points from uganda for cheaper!" ![]() Originally Posted By Dee_NY: Funny, I'm actually down to my last case of PMC, and can definitely use some more, but not at those prices... I hear what your saying about it being under powered, nothing near xm193 of course, but it does just fine for range work, at least in my experience. In fact, if memory serves correctly, my oldest daughter was hitting targets out to 400-500 yards with PMC at a West point shoot back in say, 2010. Now with that said, is it possibly that the older PMC 223 was loaded at higher pressures in comparison to what's being manufactured today, in a post Covid world? I have no idea, however I do know when it comes to choosing ammo, it is most certainly mission driven like everything else, you need the right tools for the right job. That's awesome news about your daughter, props to raising her right! As an aside, I've shot 62 grain federal 223 fusion (under powered compared to even 55 grain 223) out to 600 yards and was scoring hits on a man sized target. So one can stretch out far with even anemic 223 loads. I think PMC fake m193 clone is over priced for what it is. I also think it is deceptive / quasi false advertising since they market it as a m193 clone when it def is not. It is usually the cheapest 55 grain "5.56 spec" (NOT m193 spec though) load out there, but I personally would rather pay a couple cents more per round for true m193 spec ammo. I also like to practice with what I'd be likely to use for real, and for basically a negligable price difference, I see no reason to get the underpowered fake immitation stuff. |
|
|
AU has cases of Magtech/CBC 5.56 M193 for $400
$435 shipped/case to me via UPS, no tax. Seems like a good deal. 337 cases in stock. Cheaper on shipping to order cases separately, FYI. Link |
|
|
Originally Posted By JLAudio: AU has cases of Magtech/CBC 5.56 M193 for $400 $435 shipped/case to me via UPS, no tax. Seems like a good deal. 337 cases in stock. Cheaper on shipping to order cases separately, FYI. Link View Quote They must be a west coast company. Shipping of one case to me on the east was $73.... |
|
|
|
I get taxed $33 and $72 shipping to PA.
But a good starting price. Hopefullt others offer it for that price with better shipping |
|
|
This weekend, Velocity Ammo has 1K Blazer Brass 124 gr. 9mm for $259.99 shipped.
|
|
A professional is someone who can do his best work when he doesn't feel like it.
|
Is this a good deal. Federal XM193 Rifle Ammunition 5.56mm 55 gr FMJ 3165 fps 500/ct Case (25-20/ct Boxes)
free shipping ended up being 46 cpr for me with tax. Are we off of Federal? I did just buy some IMI M193 but it's 7 cpr more. ![]() https://www.natchezss.com/federal-xm193-rifle-ammunition-556mm-55-gr-fmj-3165-fps-500ct-case-25-20ct-boxes |
|
|
Good ammo. Price is decent.
|
|
Buy It Cheap!
Stack It Deep! |
Originally Posted By TheKurnal: Is this a good deal. Federal XM193 Rifle Ammunition 5.56mm 55 gr FMJ 3165 fps 500/ct Case (25-20/ct Boxes) free shipping ended up being 46 cpr for me with tax. Are we off of Federal? I did just buy some IMI M193 but it's 7 cpr more. https://www.ar15.com/media/mediaFiles/420365/Screenshot_2023-02-18_211042_jpg-2716684.JPG https://www.natchezss.com/federal-xm193-rifle-ammunition-556mm-55-gr-fmj-3165-fps-500ct-case-25-20ct-boxes View Quote Seems like one of the better prices in the current 5.56 market, especially for someone only looking to buy 500 rds (usually have to buy 1K to get it for that price). Seems like it's a penny or two cheaper per round than the PMC and Winchester 5.56 going around. Federal makes good ammo, I'm sure their 5.56 market volume is just decreasing because they lost the Lake City contract to Winchester. Wonder if this ammo is old stock Lake City (or at least some old stock LC components?) or if what's on the market is in-house Federal ammo now? If in-house I wonder if this would be the same "FC" brass they use on American Eagle .223 ammo? At any rate, $0.42 per round shipped (with the coupon code) before tax is about the best I've seen for 5.56 pressure ammo right now, and is on par with a lot of brass .223 prices. If you're just looking for brass .223 range ammo, I think the Igman .223 from Sportsman's Guide is probably the best deal going right now, especially if you play their Buyer's Club game (I think they have a free trial or sell a short term membership). |
|
|
Is Bucking Horse Outpost GTG? They are having a decent sale with free shipping over $125. $12 to insure your package, if you like to do that.
|
|
|
Originally Posted By smitty_007: Is Bucking Horse Outpost GTG? They are having a decent sale with free shipping over $125. $12 to insure your package, if you like to do that. View Quote View All Quotes View All Quotes Originally Posted By smitty_007: Is Bucking Horse Outpost GTG? They are having a decent sale with free shipping over $125. $12 to insure your package, if you like to do that. Great to go! I have placed three orders with them with no issues. Def worth taking advantage of the free shipping, esp in combination with one of their ammo sales. Originally Posted By --bullseye--: Originally Posted By TheKurnal: Is this a good deal. Federal XM193 Rifle Ammunition 5.56mm 55 gr FMJ 3165 fps 500/ct Case (25-20/ct Boxes) free shipping ended up being 46 cpr for me with tax. Are we off of Federal? I did just buy some IMI M193 but it's 7 cpr more. https://www.ar15.com/media/mediaFiles/420365/Screenshot_2023-02-18_211042_jpg-2716684.JPG https://www.natchezss.com/federal-xm193-rifle-ammunition-556mm-55-gr-fmj-3165-fps-500ct-case-25-20ct-boxes Seems like one of the better prices in the current 5.56 market, especially for someone only looking to buy 500 rds (usually have to buy 1K to get it for that price). Seems like it's a penny or two cheaper per round than the PMC and Winchester 5.56 going around. Federal makes good ammo, I'm sure their 5.56 market volume is just decreasing because they lost the Lake City contract to Winchester. Wonder if this ammo is old stock Lake City (or at least some old stock LC components?) or if what's on the market is in-house Federal ammo now? If in-house I wonder if this would be the same "FC" brass they use on American Eagle .223 ammo? At any rate, $0.42 per round shipped (with the coupon code) before tax is about the best I've seen for 5.56 pressure ammo right now, and is on par with a lot of brass .223 prices. If you're just looking for brass .223 range ammo, I think the Igman .223 from Sportsman's Guide is probably the best deal going right now, especially if you play their Buyer's Club game (I think they have a free trial or sell a short term membership). I would avoid Sportsman's guide, I and others have had some really bad / shady experiences with them. I would never buy from them again after what they did to me. What do you mean Federal lost the Lake City contract to Winchester? Aren't both companies owned by VISTA? |
|
|
|
What is written is my opinion, and my opinion only.
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2023 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.